How do I remove a drawer from an ENHET cabinet?
To remove the drawer from the ENHET frame, first pull the drawer all the way towards you, then lift up the front, pull it a bit further, lower it down, and then remove the drawer.
You can also find this description in the assembly instructions. If you no longer have your assembly instructions, you can find them on our website by searching for the product name or article number in the search field at the top of the homepage. Simply click on 'Product Information' and then 'Assembly & Documents' to find the assembly instructions.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
If you want to remove your ENHET drawer front after attaching it, start by loosening the plastic fasteners at the top of the drawer. Then, slide the plastic fittings along the front (do not bend them outward). Next, lift the plastic fittings out of the keyholes. Now, the drawer should be detached from the front. Place the front on the floor, lift the drawer upwards, and tilt it backwards to detach it from the metal brackets.
Read moreIf the drawer hits the water trap or adjacent fronts, it’s usually due to incorrect installation. Please check that the drawer runner is positioned correctly and that the bracket between the drawer and the front is mounted according to the instructions - this depends on the drawer’s placement in the cabinet.
Read moreOn ENHET cabinets that are mounted in bathrooms, no legs are needed, but you can of course buy and attach legs at the front if you wish.
Read moreStart by pulling the drawer all the way out on the runners. Firmly grasp the bottom edge of the drawer front (not the sides where the runners are) and lift the drawer upwards and towards you, releasing it from the runners. Then lower the drawer and pull it forward to remove it from the frame.
Read moreTo remove the drawer from the runner, you need to press a small plastic catch located on the side of the sliding mechanism.
Read moreIf your drawer fronts overlap, it may be because the rails or fittings that attach the drawer front are not mounted correctly. Check that the rails are in the correct holes and that the screws for the bottom drawer front fittings are positioned as directed.
Read more