How do I remove the drawer front from my RATIONELL drawer?
To remove the drawer front from a RATIONELL drawer purchased after February 2009, tilt up the plastic part located on the outside of the drawer and then pull it straight out from the drawer. Repeat this on both sides of the drawer to remove the drawer front.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
The RATIONELL drawer is removable, but it requires the correct grip on the front panel to be released easily.
Read moreTo remove the drawer from the runner, you need to press a small plastic catch located on the side of the sliding mechanism.
Read moreIf your drawer fronts overlap, it may be because the rails or fittings that attach the drawer front are not mounted correctly. Check that the rails are in the correct holes and that the screws for the bottom drawer front fittings are positioned as directed.
Read moreDepending on where the drawer is intended to be positioned within the cabinet (at the bottom, above the bottom drawer or as an internal drawer), the drawer and drawer front need to be assembled differently. If the drawer front appears misaligned or positioned incorrectly it is most likely because it has not been assembled according to the intended position within the cabinet.
Read moreIf you want to remove your ENHET drawer front after attaching it, start by loosening the plastic fasteners at the top of the drawer. Then, slide the plastic fittings along the front (do not bend them outward). Next, lift the plastic fittings out of the keyholes. Now, the drawer should be detached from the front. Place the front on the floor, lift the drawer upwards, and tilt it backwards to detach it from the metal brackets.
Read moreHow you attach a drawer front to your dishwasher depends on both the dishwasher model and the front you have chosen. In the assembly instructions for the VÅGLIG connecting rail, which you need to mount the front onto the dishwasher, you'll find the specific details for your specific dishwasher model.
Read more