SKÅDIS Connector, white
Price £ 5/2 pack
When attaching the connectors to SKÅDIS pegboard, use the screws that are included with the pegboard.
How to get it
These connectors allow you to attach SKÅDIS pegboard to a desk without drilling in the wall. A simple way to conjure up extra storage space.
Article Number103.207.89
Product details
These connectors can be used to attach SKÅDIS pegboard to a desk or shelf ‒ to avoid drilling holes in the wall.
Connect to SKÅDIS pegboard and add SKÅDIS accessories to create a well organised solution by your work desk.
Designer
Eva Lilja Löwenhielm
Weight & measurements
- Width: 2 cm
- Depth: 5 cm
- Height: 18 cm
- Package quantity: 2 pack
Reviews
Great but buy extra screwsAnonymous reviewerThe grips work well when connecting to the desk but do not include anything to actually attach it to the board. Thankfully we bought the board pack which came with some extra screws otherwise we'd have been lost.
Works well on the desk and looks nice too.
GoodAnonymous reviewerWork as expected. Would prefer if the screw top was a firmer plastic as it can be damaged when tightening with a screw driver
Desk attachments Anonymous reviewerthis is a great product, one problem was there are no screws included to attach the board, I had lost mine, I contacted Ikea for spares and they supplied me with some. Great service
Fitting attachment Anonymous reviewerAs I didn't want to fix to wall these were brilliant. Allowed me to fix pegboard securely to my desk.
Incorrectly threadedAnonymous reviewerI found that one of the brackets had been threaded from the wrong side - Ikea sent a replacement pair foc, and that too had one threaded from the wrong side, but at least the other hadn't so I was able to make the pair up. Other than that quite sturdy and will do the job, though not easy for one person to do. Also would be a good idea to make the pegboards able to be used portrait or landscape format.
Useful Anonymous reviewerUseful ， but not included screw. It need to go to customer service to post screw again, it’s a little trouble.
FabAnonymous reviewerEasy to use, made it very stable attached to the kallax. Great
GreatAnonymous reviewerI’ve used these with 2 pegboards to create a room divider by attaching them to the back of a white horizontal 2*4 kallax on an underframe and it works great. It lets the light in but gives privacy when I’m working and I can hang my headset etc on it, all without damaging the wall.
You need to use the original screws that came with the pegboard. They are included with the pegboard itself (the ones to fix it to the wall bracket), not this attachment.
GreatAnonymous reviewerDoes the job perfectly
Not what I expected!Anonymous reviewerI thought this was a brilliant idea as someone who didn’t want to hang it on the wall. However, although it came quickly, the screws were missing. So I’ve had to order them separately with some difficulties. And also haven’t been able to use it so far :(
No fixing screwsAnonymous reviewerThese are a good idea but do not come with screws to fix it to the peg board. You are supposed to use the screws that come with the peg board and don't seem to be able to buy additional ones, given that you may have lost/no longer have these. Would be helpful to easily find additional screws for this range, but it's not; not even sure you can actually buy them separately 😪
Easy to useAnonymous reviewerReally simple and quick to set up. For those that wonder about missing screws, you arent supposed to get any, you use the scews that come with the board. Didn't realise myself until I got the board out.
Design flawAnonymous reviewerI used these for a few months, and was initially very happy. But subsequently the peg boards bowed into a banana shape from the weight of items stored in the baskets and shelves. If the metal brackets ran the full height of the peg board, this bowing would not be possible, because the peg boards would be properly supported. I had to throw all of my bowed peg boards out - so whilst these are a great concept, the current design is sadly not fit for purpose. I had several of these for a craft room, so it turned into a pretty costly mistake. The peg boards are not strong enough to be supported by such short brackets. An unusual design flaw for IKEA.
I bought these SKADIS clampsAnonymous reviewerI bought these SKADIS clamps to attach the SKADIS pegboard to my LINNMON desk/table top which is about 3.3cm thick. Honestly it was a tight fit, but I did get it one. The trick was not to tighten the given screw that holds the two plates and pegboard too tightly until you fit it onto the table if LINNMON. Pack of two, but one seemed to have about 1mm more give, so I’d say these are good for fitting to anything less than 3cm.
Sadly disappointedAnonymous reviewerThere were missing screws, so I could not used it. I also bought the matching board and it was damaged.
Doesn't work sidewaysAnonymous reviewerVery disappointed I was hoping to use these clamps on either side of the peg board to fix it to the side of the kallax shelves. Unfortunately it's only designed for the clamps to fit to the top or bottom of the peg board and going sideways won't work. I'm sure they're great for attaching to desks but not the purpose I wanted so it's a waste of money for me.
Perfect what more can I say Apart from great ideaAnonymous reviewerI Was So excited when I found these as I didn't want to put my pegboards on my walls in my living Room where my desk is and just had my 1st pegboard balancing on my desk and leaning against the wall but when I happened to be looking for my 2nd pegboard as I was so happy with the 1st I came across the desk attachments and couldn't believe it so there was no question as always it's a gadget and I had to have it. there quite heavy so that when there fixed to the pegboard and of the desk you will be surprised by how they hold it solid and do not move, trust me I am for ever banging into my pegboard and knocking it about . im blind so have no concept of distance so when I put my arm out to get something im usually bashing into something ok knocking it about obviously I'm feeling about a lot As I can't see so things really do get put through the ringer when I buy them You can fix these all around your desk and make a paŕtition around ur desk using these to hold your pegboard around your desk I love them so 10 out of 10 for another great idea ikea you really do think of everything
Very good connector for pegboardAnonymous reviewerThis is an excellent idea and connector if you don’t want to attach the Skadis pegboard to a wall. I have connected the Skadis pegboard to my desk, using these connectors which are sturdy and strong.
Very clever ideaAnonymous reviewerBought these to fix the pegboard to my desk as I didn’t want to drill holes in my new craft room walls. It work perfectly and is very stable.
Customer reviews
3.9Average rating
19Reviews
Material
What is steel?
Steel has unique characteristics when it is stretched and shaped since it remains strong. It provides strength to everything from skyscrapers and cars to bed frames and outdoor furniture. The steel industry is moving in the direction of more energy-efficient production and stronger steel qualities. It doesn’t lose any of its properties when recycled and today steel is one of the most recycled materials in the world.
Function solution
A storage solution for the entire home
You can combine SKÅDIS storage series any way you like. And if you change your mind, it’s easy to change the accessories and create a new solution. Choose if you want to attach it to a desktop, to a shelf or hang it on the wall.