BERGVATTNET Auto diverter for shower
How to get it
Don’t let precious water go down the drain. Attach this auto diverter and hose to your shower mixer to collect the cold water that would otherwise go to waste as you are waiting for the shower to heat up.
Product details
Automatically diverts cold water that would otherwise go to waste as you are waiting for the shower to heat up. The cold water runs through a separate hose and can be collected in a bucket.
Once the water temperature reaches 32°C, the water automatically diverts to the hand shower.
The collected water can be used, for example, to flush toilets or water plants.
Diverter hose clicks perfectly into the removable shelf in BERGVATTNET bucket, so it stays in place. Bucket with the bucket shelf sold separately.
Hanna-Kaarina Heikkilä
Good to know
Connects to any bottom outlet of shower mixer.
Auto diverter outlet hose for cold water collection and sealing washers included.
Water below 25°C is diverted to the bottom hose. Between 25°C and 32°C, it flows through both hoses. Use the lever to switch to the hand shower or wait. At 32°C and above, it switches there automatically.
Auto diverter can be manually overridden to allow cold water flow to the hand shower.
May be completed with BERGVATTNET bucket to enable collecting water.
May be completed with BERGVATTNET single spray hand shower with hose to maintain low water flow.
Materials and care
Material
- Body:
- Reinforced polyphenylene ether and polystyrene composite
- Washer:
- Synthetic rubber
Care
Clean with a soft damp cloth only using water and a mild washing-up detergent or soap. Never use scouring powder, steel wool, a descaling agent or a detergent that is acidic or contains alcohol or an abrasive.
Assembly and documents
Assembly instructions
Measurements
- Height: 96 mm
- Diameter: 68 mm
Package details
BERGVATTNET
Article number605.907.45- Width: 18 cm
- Height: 4 cm
- Length: 21 cm
- Weight: 0.12 kg
- Package(s): 1