Skip to main content

TRÅDFRI Driver for wireless control, smart gray, 30 W

Price $ 45.00

How to get it

Available services
Collect 45 points with
IKEA Family

It's OK to change your mind

Low Price Guarantee

Price drops? Get the difference back within 90 days with IKEA Family

More ways to pay

Checking payment options...
Product features
  • Works with IKEA smarthome products

Now it's really easy for anyone to use smart lighting. This driver allows you to connect your integrated lighting from IKEA – turn on, turn off and dim so you always have the right light and mood at home.

Article Number603.426.61

Product details

Helps lower your electric bill because dimming the lights saves energy.

Make the most of your smart lighting by connecting it to DIRIGERA, hub for smart products. Let it enhance life at home by creating the right mood and atmosphere when needed by using timers and scenes in the IKEA home smart app.

Designer

IKEA of Sweden

Article Number603.426.61

Good to know

This product is part of our smart home range. Connect it, along with other smart products, to DIRIGERA hub and IKEA Home smart app for more features and functions.

To be completed with ANSLUTA power cord, sold separately.

You can connect up to 9 units to the driver, as long as the total wattage does not exceed 30W.

A flashing light indicates when the maximum wattage for the LED driver is exceeded.

You can connect up to 10 TRÅDFRI LED drivers in one installation.

Special waste handling may be required. Please contact your local authorities for more information.

Power consumption standby/off mode: <0.3W.

Output voltage 24V.

Input voltage 100-120V.

Materials and care

Material

Polycarbonate plastic

Care

Wipe clean with a dry cloth.

Warning:This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Safety and compliance

This product bears the CE mark.

Assembly and documents

Assembly instructions

TRÅDFRI Driver for wireless control, smart gray, 30 W
TRÅDFRI Driver for wireless control603.426.61

Measurements

  • Width: 11 1/4 "
  • Depth: 2 1/8 "
  • Height: 3/4 "
  • Power: 30 W

Packaging

TRÅDFRI

Article Number603.426.61
  • Width: 2 ¼ "
  • Height: 1 ¼ "
  • Length: 13 ½ "
  • Weight: 9 oz
  • Package(s): 1

Reviews

works wellGregsystem won't work without it, no problems yet, have used this before and very pleased5
High pitch buzzing soundBryanThe driver makes very annoying high pitch buzzing sound when the light brightness lower than 100%.1
Stopped working within 3 monthsKinsleyStopped working within 3 months. Had to replace. 1
Wireless Control for DriverCopernicusExtremely easy to use and extremely functional. These have made our closet extremely lit and professional looking. 5
Tradfri light managementJohanneExcellent product. It works very well and easy to install under kitchen cabinets . Very durable 5
Closet lighting solutionIanThis may be long but is a simple detail review covering gaps in instructions and good Youtube videos online are hard to find. I used this Tradfi (power driver), Mittled (light strips), Rodret (wireless on/off switch), Ansluta (power cord), Vagdal (wiring). I've done other installs with Ribbonflex stuff, chose this for my daughter's closet as it looked more simple. This was plug and play, make sure your led rating doesn't exceed your power supply rating, otherwise buy what I did. Install was basic, figure out where you're securing the driver, wire cabling, led mounting and then go. The driver uses 1 power cable that is long with a toggle power switch, otherwise each led uses a single cable run to the driver unless you string the led units together to make a big led strip. Biggest gap is the Rodret setup. What's missing..put battery in the Rodret unit, use pin on the sync button on the Tradfi driver and then hold sync button on Rodret while holding against driver. Highly recommend5
I have 2 of these in my kitchen - works greatLjI recently installed an ikea kitchen using the Sektion series cabinets with the Bodbyn facings and use the ikea Tradfri driver with the Mittled under cabinet lights and the upper round 3" lights to light the inside of the cabinets. There are 2 separate systems and I use the "Styrbar" magnetic remotes for each side - they're on our stainless steel refrigerator. It's been 8 months and no problems so far. Remember to keep the remotes very close to the driver when pairing up with the driver. I have installation videos on my channel "LJ's How To" if you want help.5
Easy and reliableAnonymous reviewerGet it while you can! Looks like it's on it's way out!5
Super bad design power cycle flawIanFound out a month after finishing the project that after a power outage the driver turns on! So in a vacation home the lights could be on for days or weeks after even the briefest of power bumps. No way to change the default to not power on after a power bump. IKEA's solution is to spend a lot more money on a "smart hub", internet service, app, etc just to remotely see if the lights have come on and then turn them off again. Silly, wasteful, bad design.1
Disappointed i have to buy five things to get one to workDaniil$125 spent on what was initially $50 in lights and the ordeal is not over yet. Congrats on annoying your customers, Ikea!1
DisappointingAnonymousThe whole smart setup from Ikea is disappointing. The ability to customize is great but there's not enough information about what parts work together or don't and what items you need to actually make a complete set. I just wanted 2 cabinet lights that I could easily turn on and off. Tripped down the rabbit hole of needing this and a plug in addition and then realized I didn't actually have a remote and if I wanted to hook it up to a smart device, I'd need another thing. This thing alone is massive and it's a pain to try and hide somewhere and pretty ugly to have on display. Way too expensive as well. Unfortunately I bought a lot at once and threw out the box too early so I can't return this, the lights, and the plug to get something better elsewhere.1
Too many confusing partsRaymondPurchased a light and the power cable for simple under shelf lighting. Found out when we got home that I needed an additional cable to actually use the lights. I get the custom aspect of these lights, but honestly they need to sell a starter pack that has everything you need for a basic setup. Might return, might throw away, haven't decided.1
Perfect match to the ytberg lightsMarkUpto 6 lights can be attached if I read the included instructions correctly. Pair this with a remote and once the lights are up and attached, life is a bit brighter. And all your books are illuminated. 5
Disappointed you have to buy so many different parts just to get a smart kitchen cabinet lightMattySo to install a $20 light under a cabinet and use the smart-home dimming, you have to buy a $30-40 driver, a power cord, and proprietary extension cords to each and every light you add. Then you have to find somewhere to try and hide this driver and it's odd dongle on another wire, and the extra power cord length, etc., etc.. I ended up paying close to $60 to run a $20 light. And IKEA ended up using weird proprietary connectors for everything so any attempt to make things fit better DIY are needlessly difficult. And this driver is seriously underpowered for the number of connections it has.1
Work great for meRebeccaI used this in combo with the above lighting for my library and it works great so far. 4
Faulty connection to Ansluta powerchordDorotheeThe connection to the Ansluta powerchord is faulty. It took me 3 hours to figure this out. I installed my Mittled spotlights, plugged them into this driver, added the Ansluta chord and turned it on and NOTHING happened. The lights would not come on. I read articles, watched videos….. no answer. Finally I applied pressure the the chord where it plugs into the driver and my lights came on. I let go and off they went. Wiggles the whole thing around resulting in off on off on…. You get the gist. One of the pins that connect into Ansluta looks significantly shorter than the other. There you have it….. it wasn’t me and I have my sanity back! 1
Difficult to pair remote to but found solution.RyanSo I bought this for use with the MITTLED under cabinet lights. I bought the RODRET switch to connect to it. My first attempt to pair the remote (like I have done on numerous other ikea smart home pairing products without issues) proved unsuccessful. After an hour trying different things I returned this item and remote thinking they were defective. Purchased replacements and still had the same issue. It wasn't till reading a snippet in the install video I opened via QR code in directions that it is mentioned that you can try FACTORY RESETTING THE NEW REMOTE by clicking the pairing button 4 times fast within 5 seconds. Crazy you need to do this from factory but once I did that it connected like normal. Seems like it may actually be an issue with certain remotes. Anyways try factory resetting the remote before attempting to pair if you have issues with that.5
Monstrosity DarylAll I wanted was to be able to dim the cabinet lights they recommended. In order to do that I had to buy this and a separate remote. None of which is compatible with anything else to be able to control. It big and quite noticeable if you don’t secure it out of the way. It difficult since they don’t provide you anything to attached to a metal cabinet. If I had bought the lights first and missed the return deadline I would never have bought any of their lighting for cabinets. I am now looking for replacement lights that are more user friendly and compatible with other smart systems. Don’t buy.1
Cannot pair remoteKathleenCalled support, they told me to check youtube. Cannot pair with styrbar remote. Tried repeatedly, reset remote. Does not pair as shown in product video. Any other support options? I work in technology and none of these systems are clear.2
Can’t connectKayelinI got these with my whole kitchen remodel with ikea… I have not been able to connect it to the remote. I’ve followed all instructions and nothing connects. Need some help!3

Customer reviews

4.1Average rating
466Reviews

Easy and affordable home lighting technology

Rebecca Töreman is facing a group of journalists. They’re visiting the headquarters of IKEA design with hopes of getting a glimpse of innovative products. They bustle to see and touch what Rebecca and her team have spent the last two years creating: the IKEA Smart lighting range.

Rebecca is ready. She knows the reasoning and effort behind every aspect of the range, and she can explain how it will change life at home for the better. But her audience is enthralled with something she forgot could be exciting. “People were amazed with the remote,” says Rebecca. “That you could steer your lamps from wherever you are.” She laughs, pleased to be reminded it can be a delight to control the brightness or tone of a bulb remotely. “When you work with it so closely you get used to the products and the things they can do,” says Rebecca. “So, when you hear people ‘oh’ and ‘ah’ over the design and function of the remote—which I see every day—you feel very proud of what you’ve accomplished.”

Improving life at home

Smart lighting is one way we’re using technology to improve life at home. Imagine a cozy weekday family dinner, lights glowing soft and warm. When the meal is done, the table is cleared for homework, which calls for clean, bright light. The goal of Rebecca and the Smart lighting team is to make that transition simple and smooth. Literally, it can be at the touch of a button. “Lighting is such an important part of life at home,” says Rebecca. “You do so many activities every day at home and the light needs to support you in doing all these things.” The range is made up of products that can be combined to create a personalized home lighting solution. It includes LED bulbs, panels and cabinet doors that can all be controlled by a remote. You can dim them and even change the tone of the light, from warm to cold. One remote can control up to 10 Smart lighting products.

Making home tech affordable

Smart lighting technology isn’t new, but so far it hasn’t been so accessible. “It’s been very expensive and complicated,” says Rebecca. “If we can develop Smart lighting that’s easy to understand and affordable, it actually becomes accessible to the many people.” When it comes to cost, Rebecca and her team set a personal goal. “What would we want to pay for a light bulb like this?” asks Rebecca. “We’ve been going back to this idea throughout the whole process.” Working with large volumes has helped lower costs and by collaborating with experienced tech suppliers, we’ve been able to find smart ways to save. Those savings are then passed on to the customer.

User friendly and convenient

By offering “kits” that have everything you need to get started, we make it easier to have Smart lighting in your home and if you end up wanting to expand your solution, it’s simple. “You can start with the function that suits you and your family’s life, and you can build on that,” says Rebecca. You can look forward to even more Smart lighting products from IKEA in the future. “There will be upgrades and new things customers can do to improve and build on the system,” says Rebecca, who sees a fuss-free future where very little can interrupt a lazy afternoon. “If you sit on your sofa and want to turn on the light, but the light switch is over on the wall, well, obviously with the wireless remote you don’t actually have to get up!”

Learn more

Get the look

Ideas based on your recently viewed products