Over the door projectJamieI was able to drill into the top of my solid door and screw the connector for a secure mount. The door will not close, but this door does not need to close. If you need your door to close, this will not work for you. Worked perfectly for my needs and no visible holes in my door or walls.5
Terrible quality control of the screw holesAnonymous reviewerOne of the pieces works fine but on the other neither of the holes to attach to the pegboard will work. I've already mangled one of the plastic screws trying to get it in with no luck.2
They powder coated over the screw holes in the ones I receivedAnonymous reviewerI had to go to a hardware store to get a 4mm diameter 0.7mm pitch screw tap in order to properly drill out the holes to work with the intended 153311/153312 screws that ikea includes in the Skådis boards. Just got to a hardware store if you can’t find what I’m talking about. Hope this helps you out if the screws don’t fit properly 2
goodTracygood5
Great itemAnonymous reviewerEasy to use and essential if using 2 boards vertically. 5
Good KatyaI really like the idea but wish it could expand longer. Also need better installation bokkket or at least better pics. Otherwise product works well for what it is intended. 4
Fabulous!NatalieI don't like putting holes in things if I don't have to, so I've actually attached these with Command Strip tape, or, alternatively, "Nano" tape, with great success.
I currently have the skinny white Skadis hanging off the back of a white Alex 5-drawer unit (the perfect PC stand!), where it neatly secures, organizes and conceals a surge protector, excess cable, and those unwieldy power bricks).
I've also used these to place a skinny Skadis board off the side of Kallax units, in another perfect fit.
You can use Command strips or nano tape on the two, round, bottom bracing feet to add more support.
If you use nano tape, you want to gently roll it off, not pull, to avoid damaging the surface. Command strips are easier. Just be sure to clean the surface with alcohol first, in either case, to get the strongest bond.5
Very happy with it. CarolynGood product and it looks great. Easy to use5
Made it work, but not idealDanaWhile I was able to make these work by drilling new holes, I had to use my own screws and washers to attach the Skadis peg board to my older Pax wardrobe. I wish the instructions gave help for dealing with an older Pax. 2
Does the jobRubenWorks fine but some may be a little bent in packaging and hard to even out when installing.4
Not quitePilialohaIt didn’t really sit as it was supposed to with the Kallax. And some of the screws didn’t go.2
