Skip to main content
More from the PINNTORP series

PINNTORP Chair, red stained

Previous price $ 45.00
Price $ 30.00
33% off, save $15.00
Last chance
Price valid from Apr 23, 2026 and while supply lasts
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
  • A single red wooden chair with vertical slat back, sturdy and square design, perfect for dining spaces with a traditional touch.
  • Light brown wooden chair, vertical slat back, simple design, solid pine, ideal for small spaces.
Available services

Collect 30 points with
IKEA Family

It's OK to change your mind

Low Price Guarantee

Price drops? Get the difference back within 90 days with IKEA Family

More ways to pay

Checking payment options...
Product features
  • Solid wood
  • Tested for: 243 lb

This warm red wooden chair with vertical slat back brightens up any gloomy day adding a traditional character to your space. Pairs beautifully with PINNTORP table in the same color.

Article Number605.904.82

Product details

Sturdy and durable solid wood chair frame.

The grains of the wood are visible and create a warm and natural expression.

For a softer seat or to add a personal touch to the room, complete with a chair pad in the style and color of your choice.

Coordinates beautifully with PINNTORP tables, tied together by the simple expression, warm colors and attention to detail.

A side chair is ideal for smaller spaces as the armless silhouette allows it to slide effortlessly under the table when not in use.

Designer

IKEA of Sweden

Article Number605.904.82

Good to know

Product is possible to recycle or use for energy recovery, if available in your community.

To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.

Materials and care

Material

Solid pine, Stain, Clear lacquer

Care

Wipe clean with a mild soapy solution.

Wipe dry with a clean cloth.

For increased stability, re-tighten the screws about two weeks after assembly and when necessary.

Safety and compliance

This seating furniture has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.

Assembly and documents

Assembly instructions

PINNTORP Chair605.904.82

Measurements

  • Width: 16 1/2 "
  • Depth: 19 1/4 "
  • Height: 35 3/8 "
  • Seat width: 16 1/2 "
  • Seat depth: 14 5/8 "
  • Seat height: 17 3/4 "
  • Tested for: 243 lb

Packaging

PINNTORP

Article Number605.904.82
  • Width: 18 ½ "
  • Height: 3 ¼ "
  • Length: 36 ¾ "
  • Weight: 8 lb 4 oz
  • Package(s): 1

Reviews

Good chairs, but did not lastBrianWe bought four chairs. They were sticky with sap in some parts but that was expected. Our main issue was that the connector between two of the legs broke within a year on one chair.3
JunkyRachelThey lasted less then 10 months and you have to be careful who sits on them. They can topple over if a little kid leans over. One of our seats cracked in half and screws and plastic pieces holding the screws cracked on another. Can work if you weight about 100lb and are an adult.1
Broke instantlyHelenOrdered 3 of them--one of the seats split within a week, and the back of another is falling apart. Too flimsy to hold themselves together.1
NiceAndrewthe PINNTORP chair looks good and is fairly sturdy4
Great chairJosephIt is light and easy to move. Solid construction and we really like the red color. Installation was a snap. Great price too.5
Chair seat problemsCEasy to assemble EXCEPT for the seat. 3 problems with the seat: 1. Seat not marked where to put screws or screw hole started. 2. 4 screws provided were not for the wrench but were Phillips head screws 3. Screws either too long or seat too thin. Screws started to protrude the seating surface . Would not recommend3
Fashionable chairEduardoGreat accent to the guest bedroom. Beautiful red gives the room a splash of color. 5
Simple,solid chair JoanThe red stain makes them pop out in a room & virtually go with everything. I owned 3 used Pintorp chairs for about 10 yrs., then passed them on to friends who are still happily using them. They are comfortable & supportive for me at 5'3".5
Just PerfectGwendolynI needed a simple straight back chair to facilitate my in-home pulley therapy. I’m unable to drive at this time, so your quick delivery was helpful in my quest to get back behind the wheel. My friend put the chair together and there were no problems. The seat height is perfect for my tasks at hand. 5
No HolesDanetteThe chair was relatively easy to put together. There are no holes bored into the wood for the last 4 screws. It took a minute (and a lot of effort) to screw them into the wood. However, the last screw would not go in due to (I guess) the wood being of a different make-up than the rest of the chair. The wood in this particular spot was darker and not as easy get the last screw in. The screw just kept going around and around. I don't have a drill and I'm not going to buy one for this last screw that would not going into wood. 4
Good kitchen chairKristieEasy to put together and is a good sturdy chair. 5
Price right for basic chairAlmajeanneI needed a basic chair for exercise. I didn't see the seat height but it is close to what I wanted. Price was right.5
Minimal JohnLow quality 2
Small and lightweightRachelleSmall lightweight chairs. They work well with our little table. Beautiful color. Only complaint, one doesn’t sit quite flat. I’m sure it’s something that I did during assembly, I’m just not sure what or how to fix it. But that’s on me. The instructions were easy to follow, it required a lot of finger strength to get the screws in with the tool they gave you. 4
Reasonable but very basicDonnaReasonable price. Very basic and light in weight. We are small in stature so it's fine for us but not for someone taller or heavier. Finish is very light - mistakenly thought it was unfinished.3
Doubting Dowel Rods Bernie Pinntorp chairs are pretty sturdy, however, the holes for the wooden dowel rods are a bit too small to allow for simple insertion of the dowel rods without pounding them in. Also the bottom of the legs are missing floor protectors. Pinntorp tables seem to come equipped with the floor protectors on the bottom of the legs.4
Affordable seatingMarkI bought four of these chairs to supplement our dining table seating and to match our recently acquired IKEA table. Perfect match at an excellent price.5
Follow the Instructions Anonymous reviewerThis is a small chair but also only $35. The complaints here are not following the directions. If you place the seat of the chair on a counter, flip the chair upside down you can screw in the screws easy as can be. It is a sturdy lightweight chair and not bad for the price in this economy. I sure do miss old Ikea but this one still gets a good value for price. 5
Poor quality and lack of pilot holes make assembly difficultDavidThese chairs are mostly fine if you want a light weight basic chair for your first apartment or somewhere temporary. If you want something more 'adult' its probably best to look elsewhere. One thing that I found particularly annoying (and that others have noted) is that there are no pilot holes to for the screws that keep the base attached to the chair itself. This hard due to the angle as well as how these screws are attached to small flimsy plastic pieces. Also, the stain is also only on one side of the base so make sure you pay attention to that as well. Overall you definitely see where they economized. 2
Horrible design and seems extremely cheap not what I normally expect from an IKEA chairStevenI’ve been assembling Ikea stuff since 1992. This was by far the worst set of chairs to assemble the six long screws that go into each chair are extremely difficult to screw in… To the point that if I had to do more, it would definitely be causing joint or risk problem. I have never had this with another Ikea product ever. I actually had to use an extension that was provided by my TV table to actually screw the four chairs together. Crazy. Secondly, for mounting screws that amount the seat to the chair assembly have no pre-drilled holes. The screwing angle is extremely awkward, the screws are fairly big and diameter and I can’t imagine most people having any form of ease and screwing those small screws in . It takes a lot of force with very careful direction to get these screws to mount in to hold the chair seat in place. Once again, extremely bad design. Before there’s always been pre-drilled starter holes. 1

Customer reviews

4.4Review: 4.4 out of 5 stars. Total reviews: 174Average rating
174Reviews
4.4Review: 4.4 out of 5 stars. Total reviews: 174Average rating
174Reviews

Accessories for PINNTORP

Related products

Recommended for you

Get the look

Ideas based on your recently viewed products

More from the PINNTORP series