ORRSJÖN Deep sink with water trap, white, 25x21 3/4 "
How to get it
Checking availability...Collect 240 points with
It's OK to change your mind
Low Price Guarantee
More ways to pay
This deep ceramic wash-basin is designed to keep the water in the bowl and not on your floor. A clean look with soft, smooth lines and plenty of space to place your toothbrush holder and soap dispenser.
Material
Deep sink- Cover/ Spring:
- Stainless steel
- Cover cap/ Mechanism:
- Acetal plastic
- Sealing ring:
- Synthetic rubber
- Cover cap:
- Polycarbonate/ABS plastic
- Main parts:
- China, Colored glaze
Water trap, 1 bowl- Water trap frame/ Nut/ Outlet pipe:
- Polypropylene
- Washer/ Seals:
- Synthetic rubber
- Waste pipe:
- Synthetic rubber, Polypropylene
- Strainer:
- Stainless steel
- Assembly tool:
- ABS plastic
Care
Deep sinkWipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the sink.
The deep bowl makes it easier to wash without spilling on the floor.
Use the space on the wash-basin to place toothbrush holder and soap dispenser.
To enhance your style, pair with a mixer tap of your choice, sold separately.
10-year Warranty. Read about the terms in the warranty brochure.
Comprises: 1 sink and 1 water trap.
Chrome-finish wash-basin pop-up plug and overflow kit included.
Ceramic sinks are kiln-fired, which makes each one unique and the size may vary slightly from the measurements given.
Waste outlet pipe diameter: 1 1/2" (38.1 mm).
If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.
Faucets from our range and from other manufacturers can be mounted on this sink.
Fits HAVBÄCK and TÄNNFORSEN wash-stands with doors, width 23⅝".
Silicone is needed for installation, not included.
Material
Deep sink- Cover/ Spring:
- Stainless steel
- Cover cap/ Mechanism:
- Acetal plastic
- Sealing ring:
- Synthetic rubber
- Cover cap:
- Polycarbonate/ABS plastic
- Main parts:
- China, Colored glaze
Water trap, 1 bowl- Water trap frame/ Nut/ Outlet pipe:
- Polypropylene
- Washer/ Seals:
- Synthetic rubber
- Waste pipe:
- Synthetic rubber, Polypropylene
- Strainer:
- Stainless steel
- Assembly tool:
- ABS plastic
Care
Deep sinkWipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the sink.
- The sink is resistant to most chemicals, except for strong acids and strong alkalis.
This product is made up of more than one component. You can find the details of these components below.
