Product details
The armchair's bold, expressive shape with slightly angled legs adds character to any room and context – goes just as well in your living room as at your office.
The rounded shape of the armrests and backrest, and the way they meet each other, all makes a nice design detail that resembles the shape of a flower.
The backrest, armrests and low seat together provide a supportive comfort with an embracing feel.
This cover is made from Skulsta fabric that consists of polyester and cotton with a protective coating of polyurethane. It has a visual texture and a soft touch.
10-year limited warranty. Read about the terms in the limited warranty brochure.
- Coated fabric:
- 53 % Polyurethane, 35 % polyester (100% recycled), 12 % cotton
- Backrest/ Armrest:
- Layer-glued wood veneer, Polyurethane foam 1.5 lb/cu.ft., Polyurethane foam 2.0 lb/cu.ft.
- Seat:
- Plywood, Solid wood, Fiberboard, High-resilience polyurethane foam (cold foam) 2.2 lb/cu.ft., Polyurethane foam 2.0 lb/cu.ft., Felt liner
- Leg:
- Steel, Epoxy/polyester powder coating
- Foot:
- Polypropylene
- Bracket:
- Steel, Galvanized
Clean with a dust cloth or vacuum lightly using the soft brush attachment.
Wipe dry with a clean cloth.
Light stains can be removed with a damp sponge or a mild soapy solution.
Protect from direct sunlight to prevent drying out.
This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 242 lbs.This chair has been tested for domestic use and use in public environment and meets the requirements for durability and stability set forth in the following standards: EN 1021-1, EN 16139 and ANSI/BIFMA x5.4.
Measurements
- Width: 28 "
- Depth: 26 "
- Height: 28 3/4 "
- Height under furniture: 7 1/2 "
- Armrest height: 28 "
- Seat width: 19 1/4 "
- Seat depth: 17 3/4 "
- Seat height: 17 3/8 "
ArmchairArticle Number605.355.51- Width: 22 ¼ "
- Height: 15 ¼ "
- Length: 23 "
- Weight: 32 lb 2 oz
- Package(s): 1
Reviews
Terrible QAMichaelJust brought one of these home. First, I found that the screw holes for the bolts were not threaded all the way through. Fortunately I had the right size tap, so I was able to tap out the threads. Then I found that the holes in the chair bottom don't align with the screws for the back. The bolts are 13.5mm center to center ,while the back has holes 14.5mm center to center! Too close to redrill without making one huge hole. This is unusually bad quality control for IKEA. The store is a long drive from home and out of stock anyway. I've been trying to get cust service on chat for 30min but they have "unusually high load of calls". 1
