Product details
You can store often-used things like cotton pads, brushes and hygiene products in the top drawer, and other things like towels the bottom drawer.
ENHET fronts in white create a clean, bright and fresh expression that fits with most everything. Easy to enjoy and always in style.
Smooth, durable and easy-to-clean ceramic sink with space for toothbrushes, soap dispenser and other smaller things on the wide back edge.
Cleaning the floor is a breeze since this combination is wall-mounted.
The unique wedge dowels make assembly easy and the fittings are nearly invisible.
10-year Limited Warranty. Read about the terms in the Limited Warranty brochure.
Secure that the material in your bathroom walls can support the weight of the furniture. If you are uncertain about the installation, contact a professional.
- Main parts:
- Particleboard
- Front side/ Back side:
- Plastic foil
- Edge:
- Plastic edging
- Side panel:
- Particleboard, Plastic foil, Plastic edging
- Bottom panel/ Back rail:
- Particleboard, Plastic foil
- Drawer:
- Steel, Epoxy/polyester powder coating
- Drawer bottom:
- Fiberboard, Plastic foil
- Body:
- Brass, Metallized
- Spout:
- Brass, Brass, Metallized
- Water trap frame/ Nut/ Outlet pipe:
- Polypropylene
- Washer:
- Synthetic rubber
- Waste pipe:
- Synthetic rubber, Polypropylene
- Strainer:
- Stainless steel
- Seals:
- Polyethylene foam
- Assembly tool:
- ABS plastic
Wipe clean with a mild soapy solution.
Wet marks should always be dried off as soon as possible to stop moisture penetration.
Wipe dry with a clean cloth.
Wipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.
Wipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.
Wipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the sink.
This furniture must be secured to the wall with the enclosed wall anchoring device.The sink is resistant to most chemicals, except for strong acids and strong alkalis.If you are uncertain about the strength of your bathroom walls we recommend that you use legs.Must be secured to the wall for a safe installation. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
Measurements
- Width: 25 1/2 "
- Depth: 19 1/8 "
- Height: 26 "
This product comes as 5 packages.
Drawer frontArticle Number805.153.64- Width: 12 ¼ "
- Height: 1 ½ "
- Length: 26 ½ "
- Weight: 7 lb 8 oz
- Package(s): 1
Bathroom vanity with 2 drawersArticle Number705.153.07- Width: 18 ¼ "
- Height: 4 ½ "
- Length: 25 ½ "
- Weight: 36 lb 7 oz
- Package(s): 1
Bath faucetArticle Number205.328.61- Width: 7 "
- Height: 2 ¼ "
- Length: 13 ½ "
- Weight: 1 lb 16 oz
- Package(s): 1
Water trap, 1 bowlArticle Number504.224.13- Width: 10 ¾ "
- Height: 3 ¼ "
- Length: 17 ¼ "
- Weight: 14 oz
- Package(s): 1
SinkArticle Number605.168.83- Width: 21 "
- Height: 8 ¼ "
- Length: 27 "
- Weight: 46 lb 4 oz
- Package(s): 1
Reviews
A nightmare to build MelaniWe were missing parts, the drawers didn’t match and we had to manually match them which was a pain! 3
Don’t ValeskaI would go back in time and purchase a different vanity. Sink is great but the cabinets are cheaply made. 3
Great, with a little extra effortJulieFirst of all, you have to buy the RANNILEN plumbing piece for this sink to install properly. A normal US P-Trap will not work as it will not allow the drawers to close. In the US, you likely will also need to buy a transition piece to connect the Ikea RANNILEN P-trap portion (1.5" diameter) to the US plumbing (likely 1.25" pipe in the wall). Our contractor helped us with this but a knowledgeable plumbing person at a hardware store should be able to help. Now it's installed and looks really great, but it took a little bit of research and a couple trips to Ikea and the hardware store. Worth the effort in the end. We did end up using our own facet instead of the faucet provided, and it works fine. I would post a couple of pics here, if there was a way to do so.4
