9 ALEX images
Skip images
ALEX Drawer unit, black-brown, 14 1/8x27 1/2 "
ALEX Drawer unit, black-brown, 14 1/8x27 1/2 "
ALEX Drawer unit, black-brown, 14 1/8x27 1/2 "
More from the ALEX series
ALEX Drawer unit, black-brown, 14 1/8x27 1/2 "
Price $ 110.00
How to get it
Available services
Collect 110 points with
It's OK to change your mind
Low Price Guarantee
Price drops? Get the difference back within 90 days with IKEA Family
More ways to pay
Checking payment options...
A clean look that’s easy to like and mix with other styles, either supporting a desk or standing alone. The back is finished so you can place it in the middle of the room – all sides are just as beautiful.
Article Number604.735.48
Product details
Drawer stops prevent the drawer from being pulled out too far.
This unit can be placed anywhere in the room because it is finished on the back.
Designer
Johanna Asshoff
Materials and care
Material
- Main parts/ Front:
- Particleboard, Acrylic paint, Paper foil, Plastic edging
- Drawer side/ Drawer back:
- Particleboard, Plastic foil
- Drawer bottom:
- Fiberboard, Acrylic paint
Care
Wipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Safety and compliance
This storage unit has been developed and tested for domestic use and meets the requirements for safety, durability and stability set forth in the following standard: EN 14749.
Assembly and documents
Assembly instructions
ALEX Drawer unit604.735.48Measurements
- Max. load: 26 lb
- Maximum load/drawer: 9 lb
- Max. load small drawer: 4 lb
- Width: 14 1/8 "
- Depth: 22 7/8 "
- Height: 27 1/2 "
- Drawer depth (inside): 20 1/2 "
Packaging
ALEX
Article Number604.735.48- Width: 23 ½ "
- Height: 4 ¼ "
- Length: 32 "
- Weight: 61 lb 11 oz
- Package(s): 1
Reviews
Very nice for the priceKevinVery impressed with the quality of this product for the price. I think it's an excellent value!
Not what I expectedLynnoraAssembly was challenging! Took several hours for one person to do both pieces. The particle board (where the pegs went in) kept splitting/peeling paint off the “wood”. Would not stay secure in the notches and had to reassemble 3 times! I wasn’t confident I could assemble them but managed to get it done. Laying the tabletop across the two drawers seem to make it feel more sturdy.
Very nice quality drawer unit.IvonneThis is a clean and sturdy drawer unit that I use in my pottery studio.
just what I neededMariabought 2 they are perfect just what I needed sturdy and easy to put together the only problem I had was lining the holes for the tabletop.
Sewing tableElizabethLove this for sewing organization
So versatile!ElizabethA multifunctional piece of furniture writing wonderful looking storage and lots of possibilities. I love it so much I bought two of them!
Thread drawersLauraWhile this was a challenge to put together, it was perfect for all my sewing threads
Poorly drilled holesBethGot started on first drawer and main screws don’t latch to holes, and then the corresponding hole that the screw is meant to attach to wasn’t long enough and getting the screw properly inserted broke the drawer side.
So disappointing.
Drawer slides not full extensionDaveI just assembled two of these units. Overall the quality is good and the instructions are fine. My main complaint is the drawer slides: They do not fully extend. There is about 6 1/2" inaccessible in each drawer when fully open.
For the cost I feel these definitely should have full extension drawer slides... Or at least that should be a paid option.
love theses drawersDeirdreI gathered up all my makeup and organized it in this unit. I messed up the assembly of it though and its basically up side down. The bottom panel is on the top now. So maybe the instructions could be a little clearer. Other than that - love them!
Great Drawer systemHelenI love these drawers, I have 3 sets in my craft room. Would buy more but no space. Drawers glide easily. Sturdy and well made.
Good drawer unit but not easy to build.GilbertMy daughter bought this as part of her desk when she got a job working from home. Her brother put it together for her and ran into some difficulty. He was able to figure it out and the end result was good. However, it was a struggle.
AlexDoreenlot of draws and space
AdequateJayIt meets my needs but is rather more expensive than seems justified given it is just particle board. It is very heavy. The drawers glide in and out smoothly and it looks quite nice. I just hope it holds up.
Great product at a great priceLarryRoomy drawers, easy assembly, sturdy enough to support a tabletop
20/10 perfect!PaigeThis time it great and versatile. Would definitely buy this again as it fit perfect in my home and space. Love the drawers and design. Takes forever to assemble. FYI.
Perfect SizeDariaThis Alex unit is the perfect size to fit right next to my desk. The two different heights of the drawers made it easy to fit my essential crafting supplies and keep them close at hand.
Perfect for what I need.DanielleI got this for extra storage and for my PC tower to sit on top. It’s the perfect height to sit next to my standing desk. It’s very sturdy and was easy to put together. Took my husband and I about 30min. It does not come with the casters, so if you want those you’ll have to buy separately. One of the drawers is slightly off, but it’s not very noticeable once it’s setup. It arrived that way for me (drawer tracks come pre-installed).
Perfect for building a craft areaStephanieGreat for a desk or craft area!
I love this item but..MilindaI love this item and bought a second one and built it and the only issue is that all the drawers open halfway and I have to pull them really hard to open. Not sure if it’s something I did but the thought of having to lug this item back to the store for a refund/exchange when it’s an hour and change away. If there is a way to fix this without the hassle that would be great!
Customer reviews
- Very nice for the price
Very impressed with the quality of this product for the price. I think it's an excellent value!
Kevin, United States - Very nice quality drawer unit.
This is a clean and sturdy drawer unit that I use in my pottery studio.
Ivonne, United States - just what I needed
bought 2 they are perfect just what I needed sturdy and easy to put together the only problem I had was lining the holes for the tabletop.
Maria, United States
Accessories for ALEX
Related products
Recommended for you
Material
What is particleboard?
Particleboard is made from recycled wood and sawmill leftovers – so wood pieces with the wrong shade, woodchips and sawdust become a resource instead of possibly being discarded. We use boards for things like bookcases, bed frames, sofas and kitchen frames. To protect from wear and moisture, we apply varnish, veneer or foil that adds to the furniture's look.