NÄSINGE / BERGMUND Table and 4 chairs, white/Gunnared medium grey white, 130x80 cm

Product details

• Good to know

  4 plastic feet included to protect the floor against scratches.

  Only recommended for indoor use.

  Seats 4.

  Possible to separate for recycling or energy recovery if available in your community.

  A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.

  Extra covers for BERGMUND chair are available in many different models, colours and materials, sold separately.

  To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.

  Removable washable cover.

• Materials and care

  Material

  Table

  Table top:

  Particleboard, Acrylic paint, Melamine foil, Plastic edging, Paint

  Under frame/ Leg:

  Solid wood, Adhesive, Acrylic paint

  Chair cover

  Back fabric:

  100 % polyester (100% recycled)

  Total composition:

  100 % polyester

  Chair frame

  Leg:

  Solid wood, Acrylic paint

  Seat frame:

  Steel, Epoxy coating

  Backrest frame:

  Steel

  Support panel:

  Polyethylene plastic

  Backrest cushion/ Seat cushion:

  100% polyester

  Lining/ Smoulder resistant lining:

  Polyester wadding

  Care

  TableTable and 4 chairs

  Wipe clean with a cloth dampened in a mild cleaner.

  Wipe dry with a clean cloth.

  For increased stability, re-tighten the screws about two weeks after assembly and when necessary.

  Frame, removable coverTable and 4 chairs

  Vacuum clean.

  Wipe clean with a cloth dampened in a mild cleaner.

  Wipe dry with a clean cloth.

  Light stains can be removed with textile cleaner or a sponge damped in water or a mild soapy solution.

  For increased stability, re-tighten the screws about two weeks after assembly and when necessary.

  Removable coverChair cover

  Machine wash, max 40°C, normal process.

  Do not bleach.

  Do not tumble dry.

  Iron, max 150°C.

  Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.

• Safety and compliance
  This chair has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover’s ability to resist abrasion has been tested to handle 50,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.
• Assembly and documents

  Assembly instructions

  NÄSINGE Table505.875.07BERGMUND Chair cover904.810.52BERGMUND Chair frame204.519.06

  Advice and care instructions

  NÄSINGE Table505.875.07