Why does the rails on KOMPLEMENT drawer have different colored plastic?
At IKEA, we have several suppliers who manufacture the same items to meet the demand for our products. Because of this, the colored plastic parts on the rails for the KOMPLEMENT drawer may differ, but this does not affect the function in any way.
When you buy a KOMPLEMENT drawer, the markings/details on the rails may have different colors (green or black). This is because the drawer rails come from different suppliers and has no impact on functionality. You can also mix the interior of your PAX with different KOMPLEMENT products without any issue.
Maximize your space and make the most of your storage with PAX!
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
KOMPLEMENT is a favorite that has been in our range for a long time. In 2014, we updated our KOMPLEMENT mesh baskets, which means that currently sold mesh baskets cannot be combined with pull-out rails purchased before 2014.
Read moreAll KOMPLEMENT products can be bought separately, but they may also be included if you buy a ready-made storage solution.
Read moreIf you want to remove your ENHET drawer front after attaching it, start by loosening the plastic fasteners at the top of the drawer. Then, slide the plastic fittings along the front (do not bend them outward). Next, lift the plastic fittings out of the keyholes. Now, the drawer should be detached from the front. Place the front on the floor, lift the drawer upwards, and tilt it backwards to detach it from the metal brackets.
Read moreTo remove the drawer from the ENHET frame, first pull the drawer all the way towards you, then lift up the front, pull it a bit further, lower it down, and then remove the drawer.
Read moreStart by pulling the drawer all the way out on the runners. Firmly grasp the bottom edge of the drawer front (not the sides where the runners are) and lift the drawer upwards and towards you, releasing it from the runners. Then lower the drawer and pull it forward to remove it from the frame.
Read moreTo remove the drawer front from a RATIONELL drawer purchased after February 2009, tilt up the plastic part located on the outside of the drawer and then pull it straight out from the drawer. Repeat this on both sides of the drawer to remove the drawer front.
Read more