Which inner drawers fit behind the drawer fronts in METOD kitchens?
Figuring out which inner drawer you should have can be a bit tricky as the size of the drawer fronts for METOD kitchen is named in the drawer front's name by centimeters (WidthxHeight), while the size of the drawers (MAXIMERA and KNIVSHULT) is named by three heights - low, medium and high. To make it simple, you can think that a low drawer is 10 cm high, a medium drawer is 20 cm high, and a high drawer is 30 cm high.
For example, if the drawer front is 40 cm high, and the drawer is medium (20 cm high), there is 20 cm left. This means that there is room for two low drawers (10 cm high) or one medium drawer (20 cm high) to be used as inner drawers.
Inner drawers or "hidden drawers" are supplemented either with UTRUSTA drawer front (for MAXIMERA drawers and is white) or with KNIVSHULT (for KNIVSHULT drawers and is dark grey)
If you want a drawer front that is 60 cm high, use a door and UTRUSTA fitting for mounting drawer on door.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
With the help of UTRUSTA fittings, you can install a door or front that is normally mounted with hinges on a drawer instead. We recommend using the fitting with a front that is no more than 60 cm wide and 60 cm high.
Read moreMETOD is a fully modular kitchen system from IKEA. With METOD, you have endless possibilities to design a kitchen that suits your needs perfectly, whether you prefer a modern or a traditional style for your kitchen.
Read moreWith our METOD cabinets, you have the flexibility to choose from various UTRUSTA hinges, tailored to whether you prefer drawers or doors for your cabinet.
Read moreDepending on where the drawer is intended to be positioned within the cabinet (at the bottom, above the bottom drawer or as an internal drawer), the drawer and drawer front need to be assembled differently. If the drawer front appears misaligned or positioned incorrectly it is most likely because it has not been assembled according to the intended position within the cabinet.
Read moreIf your drawer fronts overlap, it may be because the rails or fittings that attach the drawer front are not mounted correctly. Check that the rails are in the correct holes and that the screws for the bottom drawer front fittings are positioned as directed.
Read moreYes, you can! It is possible to have drawers under all the hobs we sell at IKEA.
Read more