Do I need to cut through the back of the METOD high cabinet for fridge or freezer?
If you have bought a built-in appliance from IKEA, you don't need to cut through the back of the high cabinet, it's already prepared. All to make the installation as smooth as possible!
If, on the other hand, you have bought a fridge and freezer from another retailer with a greater built-in depth than the models IKEA sells, you may need to modify the back further. You can find information on how to do this in the assembly instructions for the METOD high cabinet for fridge or freezer.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
To make your installation as smooth as possible, our METOD base cabinets for built-in oven and sink (60 and 80 cm) come with a pre‑cut opening in the bottom panel. The white 80 cm cabinets also include an additional cut‑out in the back panel, making it both easier and safer to route pipes and cables.
Read moreIn most cases, shelves are not included with our METOD frames. The shelves are called UTRUSTA and are sold separately so you can easily customize your frame to suit your needs. There are a few METOD cabinets where shelves are included.
Read moreMETOD kitchen cabinets meet the EU tests that exist, which means that the frame construction is tested for 168 kg. Please note that this does not mean that a wall cabinet can be hung on the wall and loaded with 168 kg, but it is the construction of the frame that has been tested to cope with the weight.
Read moreThe METOD ventilation grille is used to create an air channel for appliances that require ventilation. The grille can be installed either in a countertop or in a ceiling connection. The METOD ventilated plinth is placed in the base plinth. Our integrated fridges and freezers always require a ventilated plinth*.
Read moreWith our METOD cabinets, you have the flexibility to choose from various UTRUSTA hinges, tailored to whether you prefer drawers or doors for your cabinet.
Read moreTo get a 90° corner on wall cabinets, an 80 wide wall cabinet and a fitting piece are used.
Read more