How do I install a blind front under the sink?
When installing a blind front, use the angle bracket and screws that come with the METOD base cabinet frame intended for sinks. How to install the blind front is shown in the installation instructions for the base cabinet frame.
A blind front is sometimes needed at the top of a sink cabinet to hide the underside of the sink. In these cases, it is common to use a drawer front that is 20 cm high. To install the drawer front use the angle brackets and screws included with the METOD base cabinet frame.
If you're missing the angle bracket (spare part number: 124535 x2) and screws (spare part number: 10046940 x8), you can order these separately via our spare parts form.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
If you want to install a single IKEA door on a dishwasher from another manufacturer, this can usually be done without any additional fittings. However, if you plan to install split fronts - meaning several doors or drawer fronts - on your integrated dishwasher, an extra fitting may be required.
Read moreHow you attach a drawer front to your dishwasher depends on both the dishwasher model and the front you have chosen. In the assembly instructions for the VÅGLIG connecting rail, which you need to mount the front onto the dishwasher, you'll find the specific details for your specific dishwasher model.
Read moreIf the drawer hits the water trap or adjacent fronts, it’s usually due to incorrect installation. Please check that the drawer runner is positioned correctly and that the bracket between the drawer and the front is mounted according to the instructions - this depends on the drawer’s placement in the cabinet.
Read moreThe FYRTUR and KADRILJ do not need to be installed by an electrician as they are powered by the supplied battery.
Read moreTo be able to underglue your sink, an MS polymer glue is needed. The glue is a mixture of glue and silicone that both glues and seals.
Read moreLILLVIKEN water trap can be used with most of the IKEA sinks. Enlarge this answer to read more about how LILLVIKEN is installed with our different sinks and which sinks are not compatible with LILLVIKEN.
Read more