What silicone do I need to underglue my sink to a laminate and veneer worktop?
To be able to underglue your sink, an MS polymer glue is needed. The glue is a mixture of glue and silicone that both glues and seals.
When you are going to underglue your sink, it is important that you use the right type of silicone. For our laminate and veneer worktops, you need MS polymer glue. The glue is a mixture of glue and silicone that both glues and seals.
Talk to the staff in the store where you shop and tell them what you need the silicone for. In many cases, staff can give advise before use.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
When you order a custom-made worktop in laminate or thick veneer from IKEA, we can make various cut-outs or adjustments to your worktop to make it perfect in your kitchen. These cut‑outs or adjustments are referred to as HACKBOL in your order.
Read moreLILLVIKEN water trap can be used with most of the IKEA sinks. Enlarge this answer to read more about how LILLVIKEN is installed with our different sinks and which sinks are not compatible with LILLVIKEN.
Read moreYes, you need to install a diffusion barrier on laminate and wood veneer countertops. This prevents damage to the countertop caused by hot steam released from your dishwasher, washing machine and oven.
Read moreOur worktops in quartz composite, high-pressure porcelain and glass composite include a measurement service in the mandatory service fee. We do not offer a measurement service for laminate or thick veneer custom worktops.
Read moreOf course! Depending on the manufacturer you have for your worktops or wall panels, the installation is done in different ways.
Read moreYes, you need to seal the hole for the tap with silicone. This will prevent moisture from penetrating and damaging your worktop.
Read more