SKYTTA Rail for sliding door frame, 3 tracks black
How to get it
10-year guarantee
Create a floor-to-ceiling sliding door solution with these rails together with SKYTTA sliding doors. No need to drill in the floor since the floor rail tapes in place. It works on various kinds of surfaces.
Product details
Choose the doors you want, measure the total width, then buy as many rails you need. Cut the last rail to the correct size.
If you want a SKYTTA sliding door solution with 3 doors, we recommend that you choose SKYTTA 3-track rail.
If you want a SKYTTA sliding door solution with 2, 4 or more doors, we recommend that you choose SKYTTA 2-track rail instead.
The floor rail tapes in place to the floor, so you don't need to drill any holes. This makes it possible to use SKYTTA on both wooden and stone/tiled floors.
A wooden beam to place between the ceiling and the ceiling rail is included. The beam compensates for any smaller irregularities in the ceiling so that the doors are easy to open and close.
Does the door not reach your ceiling? With SKYTTA ceiling height reducer you can build a fake wall between the doors and the ceiling and still have a stable solution.
The rails can easily be connected to create a longer solution by using spring pins to align them.
10-year Limited Warranty. Read about the terms in the Limited Warranty brochure.
IKEA of Sweden
Good to know
Includes: 1 floor rail, 1 ceiling rail, and 1 wooden beam.
Available in white, black, and aluminum.
Clean the floor rail and door wheels regularly to make sure that the doors are easy to open and close.
To be completed with SKYTTA sliding doors.
It's important that your ceiling and floor are even and aligned so that the doors are easy to open and close.
This ceiling rail can be adjusted to cater for +/- ¼" height difference between the rail and the ceiling.
SKYTTA ceiling height reducer can cover a gap above the doors to the ceiling between 2-14¼". If you have an even higher ceiling, we recommend that you consult a carpenter.
The floor rail tapes in place to the floor. The tape might leave marks or glue, or remove fibers from soft wooden floors, when taken off.
Materials and care
Material
- Cover strip:
- Aluminum, Anodized
- Support rail:
- Solid pine, Stain
Care
Wipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
Clean the floor rail and door wheels regularly to make sure that the doors are easy to open and close, and to avoid damaging the wheels.
Measurements
- Width: 12.2 cm (4 3/4 ")
- Length: 200.0 cm (78 3/4 ")
Packaging
SKYTTA
Article number905.533.55- Width: 13 cm (5 ")
- Height: 8 cm (3 ")
- Length: 204 cm (80 ")
- Weight: 9.11 kg (20 lb 1 oz)
- Package(s): 1