NORBERG / KÄTTIL Table and 2 chairs, white/Knisa light gray, 74 cm (29 1/8 ")
How to get it
Checking availability...You save space when the table is not being used as it can be folded away.
- Solid wood
Material
Wall-mounted drop-leaf table- Table top/ Top rail:
- Particleboard, Plastic edging, High-pressure melamine laminate
- Underframe/ Mounting plate:
- Steel, Epoxy/polyester powder coating
- Plastic part:
- Polyamide, Polypropylene, Polyethylene
- Spring/ Pin:
- Steel
Chair- Cover/ Lining/ Fabric:
- 100% polyester (min. 90% recycled)
- Leg:
- Solid wood, Acrylic paint
- Seat:
- 100 % polypropylene, Solid wood, Fiberboard, High-resilience polyurethane foam (cold foam) 2.2 lb/cu.ft.
- Backrest:
- 100 % polypropylene, Solid wood, Polyurethane foam 2.2 lb/cu.ft.
Care
Removable coverTable and 2 chairsMachine wash warm, normal cycle.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Do not dry clean.
TableTable and 2 chairsWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
FrameTable and 2 chairsFor maximum quality, re-tighten the screws when necessary.
Advice and care instructions
NORBERG Wall-mounted drop-leaf table903.657.93
Becomes a practical shelf for small things when folded down.
Table top covered with melamine, which gives a durable, easy to clean finish.
Recommended for indoor use only.
Possible to separate for recycling or energy recovery if available in your community.
Different wall materials require different types of fasteners. Use fasteners suitable for the walls in your home.
For use at table height: Mount the table to the wall so that the top edge of the table top reaches a height of ca. 29⅛".
Material
Wall-mounted drop-leaf table- Table top/ Top rail:
- Particleboard, Plastic edging, High-pressure melamine laminate
- Underframe/ Mounting plate:
- Steel, Epoxy/polyester powder coating
- Plastic part:
- Polyamide, Polypropylene, Polyethylene
- Spring/ Pin:
- Steel
Chair- Cover/ Lining/ Fabric:
- 100% polyester (min. 90% recycled)
- Leg:
- Solid wood, Acrylic paint
- Seat:
- 100 % polypropylene, Solid wood, Fiberboard, High-resilience polyurethane foam (cold foam) 2.2 lb/cu.ft.
- Backrest:
- 100 % polypropylene, Solid wood, Polyurethane foam 2.2 lb/cu.ft.
Care
Removable coverTable and 2 chairsMachine wash warm, normal cycle.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Do not dry clean.
TableTable and 2 chairsWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
FrameTable and 2 chairsFor maximum quality, re-tighten the screws when necessary.
- This cover’s ability to resist abrasion has been tested to handle 40,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.The cover has a lightfastness level of 5-6 (the ability to resist color fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.WARNING! Falling hazard – to reduce the risk of this product falling down, it must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.This seating furniture has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.
Advice and care instructions
NORBERG Wall-mounted drop-leaf table903.657.93
- 903.657.93
1 × NORBERG
Wall-mounted drop-leaf table- Width: 47 cm (18 ½ ")
- Height: 6 cm (2 ¼ ")
- Length: 77 cm (30 ")
- Weight: 9.05 kg (19 lb 15 oz)
505.003.402 × KÄTTIL
Chair- Width: 45 cm (17 ½ ")
- Height: 18 cm (7 ")
- Length: 90 cm (35 ½ ")
- Weight: 5.48 kg (12 lb 1 oz)
This product is made up of more than one component. You can find the details of these components below.
