NÄSINGE / BERGMUND Table and 4 chairs
How to get it
Checking availability...- Solid wood
Care
TableTable and 4 chairsWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Frame, removable coverTable and 4 chairsVacuum clean.
Wipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
Light stains can be removed with a textile cleaner or a damp sponge and a mild soapy solution.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Removable coverChair coverMachine wash warm, normal cycle.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Dry clean any solvent except trichloroethylene.
Assembly instructions
NÄSINGE Table505.875.07BERGMUND Chair cover904.810.52BERGMUND Chair frame204.519.06Advice and care instructions
NÄSINGE Table505.875.07
Four plastic feet to protect the floor against scratches included.
Recommended for indoor use only.
Seats 4.
Possible to separate for recycling or energy recovery if available in your community.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
Extra covers for BERGMUND chair are available in many different models, colors and materials, sold separately.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Removable, washable cover
Care
TableTable and 4 chairsWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Frame, removable coverTable and 4 chairsVacuum clean.
Wipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
Light stains can be removed with a textile cleaner or a damp sponge and a mild soapy solution.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Removable coverChair coverMachine wash warm, normal cycle.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Dry clean any solvent except trichloroethylene.
- The cover has a lightfastness level of 5 (the ability to resist color fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover’s ability to resist abrasion has been tested to handle 50,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 242 lbs.
Assembly instructions
NÄSINGE Table505.875.07BERGMUND Chair cover904.810.52BERGMUND Chair frame204.519.06Advice and care instructions
NÄSINGE Table505.875.07


- 505.875.07
1 × NÄSINGE
Table- Width: 84 cm (33 ¼ ")
- Height: 7 cm (2 ¾ ")
- Length: 134 cm (52 ¾ ")
- Weight: 23.08 kg (50 lb 14 oz)
904.810.524 × BERGMUND
Chair cover- Width: 18 cm (7 ")
- Height: 5 cm (1 ¾ ")
- Length: 24 cm (9 ½ ")
- Weight: 0.40 kg (14 oz)
204.519.064 × BERGMUND
Chair frame- Width: 50 cm (19 ¾ ")
- Height: 19 cm (7 ¼ ")
- Length: 61 cm (24 ")
- Weight: 8.15 kg (17 lb 15 oz)
This product is made up of more than one component. You can find the details of these components below.















