Product details
Combine the modules as you like and adapt your LILLEHEM sofa to your needs, activities and space – with generous seating for many or a smaller solution without armrests in tight spaces.
A flexible solution that you can always update, expand and change if conditions shift.
You can complete your sofa with TUNSTA table, placing it as a separate coffee table or as an integrated side table to create a complete solution that suits your needs.
The modules look equally nice from all sides so you can place your sofa along the wall or in the middle of the room.
The seat cushion is made with foam and zigzag springs that provide supportive comfort when sitting or lying down. The generous backrest is comfy for both back and lumbar.
This cover is made of dope-dyed Gunnared fabric in polyester. It is a durable fabric with a wool-like feel, a warm look and a two-toned mélange effect.
The cover is easy to keep clean since it can be machine washed and is easy to take off and put on again.
10-year limited warranty. Read about the terms in the limited warranty brochure.
Max load on table top: 88 lbs.
- Clip:
- Polypropylene
- Frame:
- Polyurethane foam 2.0 lb/cu.ft., Plywood, Laminated veneer lumber
- Lining:
- 100 % polypropylene
- Frame:
- Polyurethane foam 1.2 lb/cu.ft., Polyurethane foam 1.5 lb/cu.ft., Plywood
- Lining:
- 100 % polypropylene
- Solid beech, Tinted lacquer
- Table top:
- Particleboard, Plastic foil (min. 70% recycled), Plastic foil, Plastic edging, Plastic edging
- Bottom panel/ Side panel/ Partition:
- Particleboard, Paper foil, Plastic edging, Plastic edging
- Leg:
- Steel, Epoxy/polyester powder coating
- Bracket:
- Steel, Galvanized
- 100% polyester (min. 90% recycled)
Machine wash warm, normal cycle.
To be washed separately.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Iron on reverse side.
Dry clean any solvent except trichloroethylene.
This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 242 lbs.This table has been developed for public use and meets the requirements for safety, durability and stability set forth in the following standard: EN 15372 and ANSI/BIFMA X:5.5.The cover’s ability to resist abrasion has been tested to handle 50,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.The cover has a lightfastness level of 6 (the ability to resist color fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.
Measurements
- Width: 80 cm (31 1/2 ")
- Height: 73 cm (28 3/4 ")
- Depth: 76 cm (29 7/8 ")
- Seat height: 42 cm (16 1/2 ")
- Seat depth: 60 cm (23 5/8 ")
- Seat width: 50 cm (19 5/8 ")
- Height under furniture: 20 cm (7 7/8 ")
- Table top height: 37 cm (14 5/8 ")
- Table top, length: 70 cm (27 1/2 ")
- Table top, width: 50 cm (19 5/8 ")
- Max. load, tabletop: 40 kg (88 lb)
This product comes as 10 packages.
1-seat section frameArticle number905.184.23- Width: 74 cm (29 ¼ ")
- Height: 23 cm (9 ")
- Length: 74 cm (29 ¼ ")
- Weight: 10.95 kg (24 lb 2 oz)
- Package(s): 1
Armrest frameArticle number805.184.33- Width: 53 cm (20 ¾ ")
- Height: 17 cm (6 ¾ ")
- Length: 76 cm (30 ")
- Weight: 6.00 kg (13 lb 4 oz)
- Package(s): 3
LegArticle number205.184.26- Width: 17 cm (6 ½ ")
- Height: 4 cm (1 ¾ ")
- Length: 24 cm (9 ½ ")
- Weight: 0.92 kg (1 lb 16 oz)
- Package(s): 1
Side tableArticle number505.224.22- Width: 51 cm (20 ")
- Height: 6 cm (2 ½ ")
- Length: 88 cm (34 ½ ")
- Weight: 13.76 kg (30 lb 5 oz)
- Package(s): 1
Cover for armrestArticle number605.196.07- Width: 25 cm (9 ¾ ")
- Height: 3 cm (1 ")
- Length: 37 cm (14 ¼ ")
- Weight: 0.48 kg (1 lb 1 oz)
- Package(s): 3
Cover for 1-seat sectionArticle number905.195.78- Width: 25 cm (9 ¾ ")
- Height: 3 cm (1 ¼ ")
- Length: 37 cm (14 ¼ ")
- Weight: 0.57 kg (1 lb 4 oz)
- Package(s): 1
