Product details
A flexible solution that you can always update, expand and change if conditions shift.
You can complete your sofa with TUNSTA table, placing it as a separate coffee table or as an integrated side table to create a complete solution that suits your needs.
The seat cushion is made with foam and zigzag springs that provide supportive comfort when sitting or lying down. The generous backrest is comfy for both back and lumbar.
The modules look equally nice from all sides so you can place your sofa along the wall or in the middle of the room.
You can renew the sofa and vary the expression with different removable and washable covers and add personality with cushions and throws.
This cover is made of dope-dyed Gunnared fabric in polyester. It is a durable fabric with a wool-like feel, a warm look and a two-toned mélange effect.
The cover is easy to keep clean since it can be machine washed and is easy to take off and put on again.
10-year limited warranty. Read about the terms in the limited warranty brochure.
Max load on table top: 88 lbs.
- Clip:
- Polypropylene
- Frame:
- Polyurethane foam 2.0 lb/cu.ft., Plywood, Laminated veneer lumber
- Lining:
- 100 % polypropylene
- Frame:
- Polyurethane foam 1.2 lb/cu.ft., Polyurethane foam 1.5 lb/cu.ft., Plywood
- Lining:
- 100 % polypropylene
- 100% polyester (min. 90% recycled)
- Table top:
- Particleboard, Plastic foil (min. 70% recycled), Plastic foil, Plastic edging, Plastic edging
- Bottom panel/ Side panel/ Partition:
- Particleboard, Paper foil, Plastic edging, Plastic edging
- Leg:
- Steel, Epoxy/polyester powder coating
- Bracket:
- Steel, Galvanized
- Steel, Epoxy/polyester powder coating
Machine wash warm, normal cycle.
To be washed separately.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Iron on reverse side.
Dry clean any solvent except trichloroethylene.
The cover has a lightfastness level of 6 (the ability to resist color fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover’s ability to resist abrasion has been tested to handle 55,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.This table has been developed for public use and meets the requirements for safety, durability and stability set forth in the following standard: EN 15372 and ANSI/BIFMA X:5.5.
Measurements
- Width: 342 cm (134 5/8 ")
- Height: 73 cm (28 3/4 ")
- Depth: 76 cm (29 7/8 ")
- Seat height: 42 cm (16 1/2 ")
- Seat depth: 60 cm (23 5/8 ")
- Height under furniture: 20 cm (7 7/8 ")
- Length: 220 cm (86 5/8 ")
This product comes as 28 packages.
1-seat section frameArticle number905.184.23- Width: 74 cm (29 ¼ ")
- Height: 23 cm (9 ")
- Length: 74 cm (29 ¼ ")
- Weight: 10.95 kg (24 lb 2 oz)
- Package(s): 3
2-seat module frameArticle number205.194.16- Width: 74 cm (29 ¼ ")
- Height: 23 cm (9 ")
- Length: 144 cm (56 ¾ ")
- Weight: 17.70 kg (38 lb 16 oz)
- Package(s): 2
Armrest frameArticle number805.184.33- Width: 53 cm (20 ¾ ")
- Height: 17 cm (6 ¾ ")
- Length: 76 cm (30 ")
- Weight: 6.00 kg (13 lb 4 oz)
- Package(s): 6
Cover for 1-seat sectionArticle number905.195.78- Width: 25 cm (9 ¾ ")
- Height: 3 cm (1 ¼ ")
- Length: 37 cm (14 ¼ ")
- Weight: 0.57 kg (1 lb 4 oz)
- Package(s): 3
Cover for 2-seat moduleArticle number805.196.73- Width: 38 cm (14 ¾ ")
- Height: 3 cm (1 ")
- Length: 57 cm (22 ¼ ")
- Weight: 1.00 kg (2 lb 3 oz)
- Package(s): 2
Cover for armrestArticle number605.196.07- Width: 25 cm (9 ¾ ")
- Height: 3 cm (1 ")
- Length: 37 cm (14 ¼ ")
- Weight: 0.48 kg (1 lb 1 oz)
- Package(s): 6
Side tableArticle number505.224.22- Width: 51 cm (20 ")
- Height: 6 cm (2 ½ ")
- Length: 88 cm (34 ½ ")
- Weight: 13.76 kg (30 lb 5 oz)
- Package(s): 1
LegArticle number605.184.29- Width: 15 cm (6 ")
- Height: 5 cm (2 ")
- Length: 23 cm (8 ¾ ")
- Weight: 1.16 kg (2 lb 9 oz)
- Package(s): 5
