Choose Chair:
How to get it
Checking availability...Related products
Round and ready for good times – this table keeps everyone engaged and in on the conversation.
Material
Table- Under frame/ Leg:
- Steel, Epoxy/polyester powder coating
- Foot:
- Polypropylene plastic (min. 50% recycled)
- Table top:
- Particleboard, Melamine foil, Tinted clear acrylic lacquer, Plastic edging
Chair- Backrest/ Spindle:
- Solid birch, Adhesive, Clear acrylic lacquer
- Seat:
- Layer-glued wood veneer, Plywood, Birch veneer, Clear acrylic lacquer
- Leg frame:
- Solid birch, Birch plywood, Adhesive, Clear acrylic lacquer
Care
ChairWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
TableWipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Painted in layers of matte green for a smooth finish that’s easy to wipe clean with a damp cloth.
Revives the classic 1970s spindle chair, bringing an elegant touch of our furniture heritage to any dining space.
You sit comfortably thanks to the chair's shaped back and seat.
Constructed from solid birch and birch veneer for strength and lasting durability.
Recommended for indoor use only.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Material
Table- Under frame/ Leg:
- Steel, Epoxy/polyester powder coating
- Foot:
- Polypropylene plastic (min. 50% recycled)
- Table top:
- Particleboard, Melamine foil, Tinted clear acrylic lacquer, Plastic edging
Chair- Backrest/ Spindle:
- Solid birch, Adhesive, Clear acrylic lacquer
- Seat:
- Layer-glued wood veneer, Plywood, Birch veneer, Clear acrylic lacquer
- Leg frame:
- Solid birch, Birch plywood, Adhesive, Clear acrylic lacquer
Care
ChairWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
TableWipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
- This seating furniture has been tested for public use and meets the requirements for safety, durability and stability set forth in the following standards: EN 16139-Level 1.
- 606.179.62
1 × IKEA PS 2026
Table- Width: 100 cm (39 ¼ ")
- Height: 7 cm (2 ½ ")
- Length: 100 cm (39 ¼ ")
- Weight: 17.15 kg (37 lb 13 oz)
206.070.074 × HÖGVED
Chair- Width: 48 cm (18 ¾ ")
- Height: 48 cm (18 ¾ ")
- Length: 52 cm (20 ¼ ")
- Weight: 5.05 kg (11 lb 2 oz)
This product is made up of more than one component. You can find the details of these components below.
