BACKSJÖN Sink with water trap, white, 80x48 cm (31 5/8x18 3/4 ")
How to get it
Checking availability...Related products
This integrated crushed marble wash-basin with sleek, modern design fits perfectly in our wash-stands. A flawless look and plenty of space in the back where you can place soap and toothbrush holder.
10-year guarantee
Material
Sink- Main parts:
- Polyester/crushed marble, Polyester
- Cover/ Spring:
- Stainless steel
- Cover cap/ Mechanism:
- Acetal plastic
- Sealing ring:
- Synthetic rubber
- Cover cap:
- Polycarbonate/ABS plastic
Water trap, 1 bowl- Water trap frame/ Nut/ Outlet pipe:
- Polypropylene
- Washer/ Seals:
- Synthetic rubber
- Waste pipe:
- Synthetic rubber, Polypropylene
- Strainer:
- Stainless steel
- Assembly tool:
- ABS plastic
Care
SinkWipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the sink.
Made of crushed marble which enables sharp, crisp edges with a scratch-resistant surface. This gives the wash-basin a clean and modern look.
Use the space on the wash-basin to place toothbrush holder and soap dispenser.
To enhance your style, pair with a mixer tap of your choice, sold separately.
10 year warranty. Read about the terms in the warranty brochure.
Comprises: 1 sink and 1 water trap.
Chrome-finish wash-basin pop-up plug and overflow kit included.
If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.
Faucets from our range and from other manufacturers can be mounted on this sink.
Fits HAVBÄCK, ÄNGSJÖN, TÄNNFORSEN and HEMNES washstands.
Silicone is needed for installation, not included.
Waste outlet pipe diameter: 1 1/4"/ 1 5/8".
Material
Sink- Main parts:
- Polyester/crushed marble, Polyester
- Cover/ Spring:
- Stainless steel
- Cover cap/ Mechanism:
- Acetal plastic
- Sealing ring:
- Synthetic rubber
- Cover cap:
- Polycarbonate/ABS plastic
Water trap, 1 bowl- Water trap frame/ Nut/ Outlet pipe:
- Polypropylene
- Washer/ Seals:
- Synthetic rubber
- Waste pipe:
- Synthetic rubber, Polypropylene
- Strainer:
- Stainless steel
- Assembly tool:
- ABS plastic
Care
SinkWipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the sink.
- The sink should not come into contact with ammonia, acids, strong detergents, hair dye or chlorine.
- 605.499.54
1 × BACKSJÖN
Sink- Width: 51 cm (20 ")
- Height: 17 cm (6 ¾ ")
- Length: 90 cm (35 ½ ")
- Weight: 14.80 kg (32 lb 10 oz)
504.224.131 × RÄNNILEN
Water trap, 1 bowl- Width: 27 cm (10 ¾ ")
- Height: 8 cm (3 ¼ ")
- Length: 44 cm (17 ¼ ")
- Weight: 0.39 kg (14 oz)
This product is made up of more than one component. You can find the details of these components below.
