Product details
The self-storing leaves are easy to insert to extend the table from 4 to 6 and just as easy to remove and tuck away under the table top when your guests have gone home.
The extension leaves increases the overhang at each end of the table creating generous space for two more people at the short ends.
Thanks to new research and a new technique, the upholstered chair gives you optimal seating comfort. Change the style anytime by replacing the chair cover with one in a different colour or model.
The seat's bowl-shaped bottom is adapted for your sit bones and those of most of the world's population. And with an innovative technique, the seat's padding is shaped to maximise your comfort.
The backrest has a built-in lumbar support and the angle between the seat and the backrest is optimally adapted to make it comfortable for you to sit a little longer at the dining table.
The chair cover comes in one piece and fixes in place with hook-and-loop fasteners so you can easily pull it off and put it back on again.
The cover is easy to keep clean as it is removable and can be washed.
The chair legs are made of solid wood, which is a durable natural material.
Only recommended for indoor use.
Seats 4-6.
Possible to separate for recycling or energy recovery if available in your community.
May be completed with FIXA stick-on floor protectors; protect the underlying surface against wear.
Extra covers for BERGMUND chair are available in many different models, colours and materials, sold separately.
Removable washable cover.
- Table top:
- Particleboard, Ash veneer, Stain, Tinted clear acrylic lacquer, Paper foil
- Extension leaf:
- Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Ash veneer, Stain, Tinted clear acrylic lacquer, Paper foil, Acrylic paint
- Side rail/ Cross rail:
- Solid beech, Adhesive, Stain, Tinted clear acrylic lacquer
- Extension rail:
- Solid beech, Adhesive, Thick beech veneer, Stain, Tinted clear acrylic lacquer
- Front/ Leg/ Bottom rail:
- Particleboard, Solid beech, Adhesive, Thick beech veneer, Stain, Tinted clear acrylic lacquer
- Leg:
- Solid wood, Stain, Clear acrylic lacquer
- Seat frame:
- Steel, Epoxy coating
- Backrest frame:
- Steel
- Support panel:
- Polyethylene plastic
- Backrest cushion/ Seat cushion:
- 100% polyester
- Lining/ Smoulder resistant lining:
- Polyester wadding
- Fabric/ Cover/ Base fabric:
- 100% cotton
- Lining/ Back fabric:
- 100 % polyester (100% recycled)
For maximum quality, re-tighten the screws when necessary.
Machine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.
Wipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
This chair has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover's ability to resist abrasion has been tested to handle 25,000 cycles. A cover that withstands 15,000 cycles or more is suitable for furniture that should withstand everyday use in the home.
Measurements
- Min. length: 152 cm
- Max. length: 223 cm
- Width: 95 cm
Este producto viene en 11 paquetes.
Extendable tableArticle number203.687.14This product has multiple packages.
- Width: 56 cm
- Height: 9 cm
- Length: 156 cm
- : 30.60 kg
- Package(s): 1
- Width: 55 cm
- Height: 7 cm
- Length: 156 cm
- : 21.30 kg
- Package(s): 1
- Width: 55 cm
- Height: 7 cm
- Length: 156 cm
- : 21.30 kg
- Package(s): 1
Chair frameArticle number103.867.37- Width: 50 cm
- Height: 19 cm
- Length: 61 cm
- : 8.15 kg
- Package(s): 4
Chair cover, medium longArticle number304.810.31- Width: 21 cm
- Height: 4 cm
- Length: 35 cm
- : 0.63 kg
- Package(s): 4
