STARKVIND Air purifier/additional gas filter, white

It will take longer time to purify the air if the room is larger than 20 square meters, but you can always use several air purifiers to cover a larger area.

The particle filter is optimised to filter away approximately 99.5 percent of smaller airborne particles such as PM2.5 particles, dust and pollen.

PM2.5 are small inhalable particles, that measure 0.1-2.5 micrometres.

The gas filter purifies the air from various gaseous pollutants such as formaldehyde, which can be found in things like cleaning/ household products and various fabrics and materials in your home.

The gas filter helps to reduce the odour of smoke, cooking odours and other unpleasant odours that may be present in the home.

You can set the air purifier to 5 different fan speeds and thereby adapt it to the needs of your home, or you can use it in auto mode.

You can hide the cable on the inside of the air purifier to avoid cable clutter.

Check the filter regularly to see if it’s dirty. An LED indicator illuminates when you need to check your filters and possibly replace them. The filter is recommended to be replaced within 6 months.

The air purifier comes with a particle filter and a gas filter so it purifies the air from various pollutants as efficiently as possible. You can also buy extra particle and/or gas filters as replacements.

The particle filter is tested according to EN 1822-1 and ISO 29463-3 which corresponds to class EPA12.

Clean Air Delivery Rate (CADR) with particle and gas filter or only particle filter: Lowest fan speed 50/55 m3/h, highest fan speed 240/270 m3/h.

Noise level with particle and gas filter or only particle filter: Lowest fan speed 24/24 dB, highest fan speed 51/53 dB.

Power consumption with particle and gas filter or only particle filter: Lowest fan speed 1.9/2W, highest fan speed 25/33W.

Net weight: 5.9 kg (with both particle filter and gas filter installed).

Assembly instructions

Advice and care instructions