Skip to main content

How do I assemble a PLATSA cabinet?

You can find the installation instructions for all PLATSA products on our website, so you can quickly get started yourself. If you look up your PLATSA cabinet, you will find the manual in the product information.

In addition to the installation instructions on our website, we have a number of tips to make assembly just that little bit easier:

Assembling the back panel
Once you have assembled the PLATSA frame, the back panel can be easily pushed through the recess provided for this purpose. Is this not possible? Then it is important to check the previous steps of the assembly manual.

While clicking the elements together, it is important that you check whether you click the plank in on the right side. The side where the dot is on the end is the top of the board. This dot is only on one side. If you click the plank in the wrong way, the shelf will get stuck just before the recess of the back wall and you will not be able to slide the back wall through properly.

Assembling drawers in a 120 cm
element If you want to assemble six drawers in a 120 cm frame, you must complete the installation steps of three drawers twice.

Adjustable LÄTTHET legs
The LÄTTHET legs for the PLATSA frames are adjustable between 110 and 122 mm. This way you can adjust the height to your space.

What particular parts of our articles do you find unsatisfactory or unhelpful?

The text is confusing to understand

The text is not relevant to my question

The text is relevant but not helpful

The text is too long or too short

Thank you for your feedback!

Was the article not helpful? Try one of the related articles below.