NORBERG / KÄTTIL Table and 2 chairs, white/Knisa light grey, 74 cm
How to get it
Checking availability...Collect 31 points with
It's OK to change your mind
You save space when the table is not being used as it can be folded away.
- Solid wood
Material
Wall-mounted drop-leaf table- Table top/ Top rail:
- Particleboard, Plastic edging, High-pressure melamine laminate
- Underframe/ Mounting plate:
- Steel, Epoxy/polyester powder coating
- Plastic part:
- Polyamide plastic, Polypropylene plastic, Polyethylene plastic
- Spring/ Pin:
- Steel
Chair- Cover/ Lining/ Fabric:
- 65% polyester (min. 90% recycled), 26% modacrylic, 9% cotton
- Interliner:
- 68 % viscose, 32 % polyester (100% recycled)
- Leg:
- Solid wood, Acrylic paint
- Seat:
- Solid wood, Fibreboard, Highly resilient polyurethane foam (cold foam)
- Backrest:
- Solid wood, Polyurethane foam 35 kg/cu.m.
- Fire-retarding interliner:
- 75% viscose/rayon, 25% polyester
Care
Removable coverTable and 2 chairsMachine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Do not dryclean.
TableTable and 2 chairsWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
FrameTable and 2 chairsFor maximum quality, re-tighten the screws when necessary.
Advice and care instructions
NORBERG Wall-mounted drop-leaf table301.805.04
Becomes a practical shelf for small things when folded down.
Table top covered with melamine, which gives a hard-wearing, easy clean finish.
Only recommended for indoor use.
Possible to separate for recycling or energy recovery if available in your community.
Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
For use at table height: Fix the table to the wall so that the top edge of the table top reaches a height of ca. 74 cm.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
Wall-mounted drop-leaf table- Table top/ Top rail:
- Particleboard, Plastic edging, High-pressure melamine laminate
- Underframe/ Mounting plate:
- Steel, Epoxy/polyester powder coating
- Plastic part:
- Polyamide plastic, Polypropylene plastic, Polyethylene plastic
- Spring/ Pin:
- Steel
Chair- Cover/ Lining/ Fabric:
- 65% polyester (min. 90% recycled), 26% modacrylic, 9% cotton
- Interliner:
- 68 % viscose, 32 % polyester (100% recycled)
- Leg:
- Solid wood, Acrylic paint
- Seat:
- Solid wood, Fibreboard, Highly resilient polyurethane foam (cold foam)
- Backrest:
- Solid wood, Polyurethane foam 35 kg/cu.m.
- Fire-retarding interliner:
- 75% viscose/rayon, 25% polyester
Care
Removable coverTable and 2 chairsMachine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Do not dryclean.
TableTable and 2 chairsWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
FrameTable and 2 chairsFor maximum quality, re-tighten the screws when necessary.
- This cover’s ability to resist abrasion has been tested to handle 40,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.The cover has a lightfastness level of 5-6 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.WARNING! Falling hazard – to reduce the risk of this product falling down, it must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.This seating furniture has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.
Advice and care instructions
NORBERG Wall-mounted drop-leaf table301.805.04
This product is made up of more than one component. You can find the details of these components below.
