Skip to main content
EN GBEnglish

How to use SYMFONISK Speakers

How to use SYMFONISK table lamp

You can turn the light on and off without affecting the speaker or sound. You can play or pause the sound with the built-in controls on the foot of the table lamp. Press the play button twice to skip forward to the next track and three times to go back to the previous track. Use the +/- buttons to adjust the volume.

Click here for the visual guide.

 

How to use SYMFONISK bookshelf speaker

You can play or pause the sound with the built-in controls at the front of the bookshelf speaker. Press the play button twice to skip to the next track and three times to jump back to the previous track. Use the +/- buttons to adjust the volume.

Click here for the visual guide.

 

How to stereo pair SYMFONISK

You need to install two or more SYMFONISK speakers on the same WiFi network. In the Sonos app, go to “Room settings” and select one of your SYMFONISK speakers. Choose “Create Stereo Pair” and then follow the steps.

Click here for the visual guide.

 

How to use multiroom audio with SYMFONISK

In the Sonos app, choose “Rooms” to see where the music is playing. You can select where you want to play the music – different music in each room or the same music everywhere.

Click here for the visual guide.

 

How to duplicate music from one room to another

Like the music that’s playing in another room? Press the Play button on your speaker for a few seconds and the music will start.

Click here for the visual guide.

 

How to set up a Sonos home theatre system with SYMFONISK

Using Sonos Beam or other Sonos home theatre product, you can include two SYMFONISK table lamp speakers or two SYMFONISK bookshelf speakers as rear speakers in your home theatre system. With the Sonos app, you can add the SYMFONISK speakers and use them for surround sound.

Click here for the visual guide.

 

How to calibrate SYMFONISK with Trueplay

First, set up your SYMFONISK table lamp or bookshelf speaker. To use Trueplay, you need an iPhone, iPad or iPod touch.

In your Sonos app, go to Room settings and choose your speakers. Under SOUND, choose Trueplay Tuning and follow the steps when the room is quiet. Use your iPhone or iPad as a microphone and move it around the room until the sound stops. This means that the calibration is complete.

Click here for the visual guide.

 

How to use Apple AirPlay 2 with SYMFONISK

To use AirPlay 2, you first need to set up your SYMFONISK speaker. On your Apple device, choose the content that you want to listen to. Press the AirPlay button on your Apple device and then choose the desired speaker.

Click here for the visual guide.

 

How to add a music service to Sonos

In the Sonos app, choose the service that you would like to add. Follow the steps shown so that Sonos app can connect to your account.

Click here for the visual guide.

 

What particular parts of our answer do you find unsatisfactory or unhelpful?

The text is confusing to understand

The text is not relevant to my question

The text is relevant but not helpful

The text is too long or too short

Thank you for your feedback!

Was the article not helpful? Try one of the related articles below.

  • Where can I find support for IKEA's Smart Blinds range?

    We have a Smart Blinds support guide for all tips and troubleshooting on our website. If you are still experiencing issues, please contact us.

    Read more

  • Can I use voice assistants with Matter Bridge?

    Matter Bridge itself does not provide the voice assistant, but many of the 3rd party ecosystems that you can connect with Matter do.

    Read more

  • Can I use IKEA sensors without the DIRIGERA hub and the IKEA Home smart app, like VALLHORN, PARASOLL and BADRING?

    Yes. VALLHORN and PARASOLL can be directly paired to a TRÅDFRI bulb and will turn the bulb on/off when the sensor is triggered. BADRING will emit a warning sound when water is detected.

    Read more

  • Can I use Matter Bridge and other integrations at the same time?

    Yes, as long as you connect to different ecosystems. Otherwise this is not recommended.

    Read more

  • I am pressing the up/down button on the remote control but nothing happens with my Smart Blind.

    There can be a small delay as the remote ‘communicates’ with the Zigbee repeater and then the blind itself.

    Read more

  • Will the music on my SYMFONISK Speaker stop if I turn off the device that hosts my Sonos app?

    Only if the music that's playing is stored on the device that you turn off.

    Read more