TONSTAD / KRYLBO Table and 4 chairs, brown stained oak veneer/Tonerud dark beige, 59x31 1/2 "
Choose Chair:
How to get it
Checking availability...Collect 719 points with
It's OK to change your mind
Low Price Guarantee
More ways to pay
Material
Table- Top panel:
- Particleboard, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Stain, Tinted lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
Chair- Leg frame:
- Steel, Epoxy/polyester powder coating
- Seat:
- 100 %polyester, Plywood, Polyurethane foam 1.5 lb/cu.ft.
- Backrest frame:
- Steel, Epoxy/polyester powder coating, Polyethylene, Polyurethane foam 1.5 lb/cu.ft., 100% recycled solid cardboard
- Fabric:
- 100 % polyester (100% recycled)
Care
TableWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Non-removable coverChairDo not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Vacuum clean.
Wipe clean with a damp cloth.
Advice and care instructions
TONSTAD Table405.999.40
Recommended for indoor use only.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Material
Table- Top panel:
- Particleboard, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Stain, Tinted lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
Chair- Leg frame:
- Steel, Epoxy/polyester powder coating
- Seat:
- 100 %polyester, Plywood, Polyurethane foam 1.5 lb/cu.ft.
- Backrest frame:
- Steel, Epoxy/polyester powder coating, Polyethylene, Polyurethane foam 1.5 lb/cu.ft., 100% recycled solid cardboard
- Fabric:
- 100 % polyester (100% recycled)
Care
TableWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Non-removable coverChairDo not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Vacuum clean.
Wipe clean with a damp cloth.
- The cover has a lightfastness level of 5 (the ability to resist color fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover's ability to resist abrasion has been tested to handle 25,000 cycles. A cover that withstands 15,000 cycles or more is suitable for furniture that should withstand everyday use in the home.This seating furniture has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.
Advice and care instructions
TONSTAD Table405.999.40
This product is made up of more than one component. You can find the details of these components below.
