To install this solution in a METOD kitchen, the assembly instructions for UTRUSTA Corner Fittings.
How to assemble a METOD wall corner cabinet 80x37cm?
To get a 90° corner on wall cabinets, an 80 wide wall cabinet and a fitting piece are used.
- The 80 cm wide cabinet is placed 75 mm out from the corner to align with the base cabinets.
- A 40 cm door is mounted using the UTRUSTA Corner Fittings.
- A wider fitting piece of 40 cm is fitted to cover the rest of the cabinet, to prevent objects from falling out of the cabinet.
- Also cut a fitting piece that goes against the oncoming wall cabinet
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
The measurement from the wall to the front edge of the plinth with 60 cm deep METOD base cabinet frames is 52 cm. If you use legs instead of plinths, the measurement from the wall to the front edge of the legs is 51 cm.
Read moreIn most cases, shelves are not included with our METOD frames. The shelves are called UTRUSTA and are sold separately so you can easily customize your frame to suit your needs. There are a few METOD cabinets where shelves are included.
Read moreWith our METOD cabinets, you have the flexibility to choose from various UTRUSTA hinges, tailored to whether you prefer drawers or doors for your cabinet.
Read moreMETOD kitchen cabinets meet the EU tests that exist, which means that the frame construction is tested for 168 kg. Please note that this does not mean that a wall cabinet can be hung on the wall and loaded with 168 kg, but it is the construction of the frame that has been tested to cope with the weight.
Read moreThe METOD wall rail should always be mounted so that the bottom edge of the rail is 6 cm below the top of the cabinet.
Read moreThe cover panels are wider than the frame to cover the space created between the wall and the frame cabinet when you mount the frame on the METOD wall rail. They also extend a bit further to align with the front that is mounted on the frame.
Read more