Can I factory reset my IKEA Home Smart products?
If you need to reset any of your smart products to their original settings (factory reset), you can easily follow the steps below for the product in question – or click through to our how-to videos to see how.
Here you will find instructions on how to reset various smart products to factory settings.
Light sources (TRÅDFRI bulbs)
- switch the main power switch on and off six times at a steady pace.
- The light will then flash to confirm that the reset was successful.
Watch TRÅDFRI bulb instruction video
Remote control, wireless dimmer or motion sensor
- Tap the pairing button four times within five seconds.
Watch TRÅDFRI remote control instruction video
Watch TRÅDFRI dimmer instruction video
Watch the TRÅDFRI motion sensor how-to video
Watch TRÅDFRI dimmer instruction video
Watch the TRÅDFRI motion sensor how-to video
Gateway (TRÅDFRI)
- Open the lid of your TRÅDFRI gateway.
- Using a needle or a straightened paper clip, press into the small hole at the top of the at least 5 seconds until the LED stops flashing.
Watch TRÅDFRI gateway instruction video
DIRIGERA hubb
- Turn the hub over and push a pin into the reset hole on the bottom.
- Press and hold the pin until the status light turns off.
- The center light will flash red four times when the reset is complete.
Note: All information on the hub is deleted upon recovery.
Smart plug
- Using a needle or paper clip, press into the small hole at the top of the socket in the at least 5 seconds until the LED stops flashing.
Smart blinds
- Press both the up and down button simultaneously for 5 seconds.
- The blind will flash to confirm recovery.
The same reset applies to all smart blinds.
See instruction video for FYRTUR roller blind.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
In the app, you can do everything you normally can do with your smart remote, and then some more. Everything from controlling the lighting outside the home and controlling scenes.
Read moreIKEA Home Smart is a collective name for our range of smart lighting, Wi-Fi speakers, electric blinds and a range of other products.
Read moreThe smart home from IKEA is designed to be easy to set up and use. After purchasing a smart product, follow the assembly instructions of the smart product and let the IKEA Home smart app guide you step-by-step.
Read moreNo. Only smart products from IKEA can be connected to DIRIGERA hub and managed in the IKEA Home smart app. Our range of smart products solves needs throughout the home and we continously develop new products.
Read moreWith DIRIGERA hub in your home, you enjoy new ways of managing your smart products from IKEA – individually, by room or simultaneously.
Read moreTo control your smart products with the app, access more digital features and simply make your smart home run more smoothly, you need to get the DIRIGERA hub. Explore the hub and the many benefits it brings to your smart home!
Read more