How do I remove adhesive residue from my product?
There are a few different remedies and methods you can try, such as heating the product with the help of a hair dryer on low heat. Just be careful that you use the right substance or method on the right product, so your product doesn't get damaged.
The placement of our labels is designed not to affect the aesthetics of the product. They also contain information that can be useful to have in the event of a complaint. If you still want to remove it and get help to remove the glue, you can first check with a specialist store for the best help. They know which agent is best for your particular surface. However, below we have some examples that are gentle on most surfaces.
Label Off - works well on glass and mirrors but also other surfaces.
Hair dryer on low heat - the heat softens the adhesive and makes it easier to remove the sticker. Best suited for glass, plastic and metal.
Warm water with a little dish soap - dampen a cloth and rub gently.
Soap solution - gentle and safe removal on more sensitive surfaces such as wood.
Avoid strong solvents such as acetone or thinner, as it can destroy surfaces such as plastic, varnish or wood!
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
To find out what the error message on your oven means, you can check the product's user manual. You can also expand this answer to see the most common error messages and their solutions.
Read moreGrease or other residues can appear as corrosion/rust in your microwave, but this is not due to any product defect.
Read moreThe front cover of our picture frames is always covered with protective film on both the front and back. If the surface looks scratched, it is usually because the protective film is still in place.
Read moreIf you want to remove your ENHET drawer front after attaching it, start by loosening the plastic fasteners at the top of the drawer. Then, slide the plastic fittings along the front (do not bend them outward). Next, lift the plastic fittings out of the keyholes. Now, the drawer should be detached from the front. Place the front on the floor, lift the drawer upwards, and tilt it backwards to detach it from the metal brackets.
Read moreDepending on how dirty the oven was before pyrolysis cleaning, there may be residues of dirt on the door or around it afterwards.
Read moreOne of the most common reasons for a bad smell in the refrigerator is that food or drinks are not stored in a sealed package or container.
Read more