What does the error code displayed on my oven mean?

The display shows "F102"
Cause: Depending on how dirty the oven was before the pyrolytic cleaning, there may be dirt residues left on the door or around it afterward.
Solution: Clean the area where there is dirt and wipe the door. Before the next use of the pyrolytic function, manually clean the inside of the door before activating the program.

The display shows "F11" or "F111"
Cause: The connection to the cooking thermometer is not properly inserted into the socket. 
Solution: Remove and reinsert the cooking thermometer's connection as far into the socket as it will go.

The display shows "C2"
Cause: The pyrolysis or defrost function is activated, but the cooking thermometer is still in its socket. 
Solution: Remove the cooking thermometer from the socket and restart the function.

The display shows "C3" 
Cause: The cleaning function "Pyrolytic cleaning" does not work because the door is not closed. 
Solution: Open and close the door. Ensure nothing is blocking it so that the door closes completely. Remember to empty the oven of accessories when using the cleaning function.

The display shows "SAFE"
Cause: Displayed on the oven's screen when the child safety lock is activated.
Solution: Refer to the product's user manual for more information on how to activate and deactivate the child safety lock.

The display shows "F6E1" or "F1E1"
Cause: There is a temporary or permanent electrical fault in the product. It may also be that the oven rack is positioned so that the oven door does not close properly. 
Solution: Remove the rack and turn it around. Alternatively, test the oven without the oven rack. If this action did not resolve the issue, contact IKEA Customer Service for further assistance.

The display shows "E1F1," "F2E1," or "F1E3"
Cause: There is a temporary or permanent electrical fault in the product.
Solution: Remove the plug from its socket and turn it around to reconnect it. Check the fuses or circuit breakers in the home's electrical panel and turn off the power to the product for 30 minutes. If this action did not resolve the issue, contact IKEA Customer Service for further assistance.

The display shows "E7"
Cause: There is a temporary or permanent electrical fault in the product. 
Solution: The error code is usually due to the oven's electronics becoming too hot. The cooling fan should automatically start to cool down the oven. When the oven is cool, it can start heating again. If the cooling fan does not start, it may be because the cooling fan is defective. Turn off the product and wait until it has cooled down. If this action did not resolve the issue, contact IKEA Customer Service for further assistance.

The display shows "F130," "F203," or "F908"
Cause: There is a temporary or permanent electrical fault in the product. 
Solution: Check the fuses or circuit breakers in the home's electrical panel and turn off the power to the product for 30 minutes. If this action did not resolve the issue, contact IKEA Customer Service for further assistance.

The display shows "F241"
Cause: There is a temporary or permanent electrical fault in the product.
Solution: Ensure the power cable is properly connected to the socket. Remove the power cable from its socket and reconnect it. If this action did not resolve the issue, contact IKEA Customer Service for further assistance.

The display shows "Demo"
Cause: The oven is programmed for a store mode, which means it does not produce any heat.
Solution: The oven needs to be checked by an authorized service technician. Contact IKEA Customer Service for further assistance.

The display shows a letter followed by a number not listed here
Cause: There is a temporary or permanent electrical fault in the product.
Solution: Check the fuses or circuit breakers in the home's electrical panel and turn off the power to the product for 30 minutes. If this action did not resolve the issue, contact IKEA Customer Service for further assistance.