Skip to main content

What parts do I need for the TÄCKNAN?

TÄCKNAN can be connected in two different ways. Either with recirculation or for extraction. Depending on the option you want to connect your TÄCKNAN, additional accessories and components may need to be added for the installation.

Recirculation:

If you have chosen recirculation for your new TÄCKNAN, you need to add NYTTIG Recirculation Kit. The kit is designed to fit perfectly with the TÄCKNAN and contains all the parts you need so that no extra parts need to be purchased.
 

Extraction:

Have you installed your TÄCKNAN induction hob for extraction so that all cooking vapours are vented outside instead of recirculated? Then you will need to add some extra components so that all cooking fumes and air are led out in the right way.
Depending on which hob you have chosen and how you connect it to your extract ventilation system, there are different components you need to buy from our third-party supplier ASCI.
Here you will also be able to acquire an extra carbon filter or grease filter if needed.

What particular parts of our articles do you find unsatisfactory or unhelpful?

The text is confusing to understand

The text is not relevant to my question

The text is relevant but not helpful

The text is too long or too short

Thank you for your feedback!