Skip to main content

What is HACKBOL?

When you order a custom-made worktop in laminate or thick veneer from IKEA, we can make various cut-outs or adjustments to your worktop to make it perfect in your kitchen. These cut‑outs or adjustments are referred to as HACKBOL in your order.

These customizations, milling and cut-outs can be for sinks, hobs or a rounded corner, among other things. On your order confirmation, you will be able to see items referred to as HACKBOL.

Below are simple explanations of what they are used for:
HACKBOL bered – covers almost all types of cuts in the worktop, such as cut‑outs for the hob and sink, cut corners and joints.
HACKBOL hål – drilling of holes under 55 mm, usually for a kitchen mixer tap.
HACKBOL tlgsyt – the underside of the worktop has the same appearance as the top. Used, for example, for bar overhangs.
HACKBOL ulim diskb – preparation for a sink that will be under‑mounted on site in the kitchen.
 
 

What particular parts of our articles do you find unsatisfactory or unhelpful?

The text is confusing to understand

The text is not relevant to my question

The text is relevant but not helpful

The text is too long or too short

Thank you for your feedback!