TONSTAD / SKANSNÄS Table and 2 chairs, brown stained oak veneer/brown beech, 80/120x70 cm
Choose Chair:
How to get it
Checking availability...Material
Extendable table- Top panel:
- Particleboard, Stain, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Tinted clear lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
- Cross rail:
- Particleboard, Plastic foil
Chair- Side frame/ Cross rail:
- Solid beech, Adhesive, Stain, Tinted clear lacquer
- Seat:
- Steel, Paper, Epoxy/polyester powder coating, Clear lacquer
- Backrest:
- Layer-glued wood veneer, Beech veneer, Stain, Tinted clear lacquer
Care
Extendable tableWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
ChairWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
If placed close to a radiator or other source of heat, the material can dry out and deteriorate.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Assembly instructions
TONSTAD Extendable table806.007.29SKANSNÄS Chair505.632.43TONSTAD / SKANSNÄS Table and 2 chairs, brown stained oak veneer/brown beech, 80/120x70 cmAdvice and care instructions
TONSTAD Extendable table806.007.29
Only recommended for indoor use.
Paper cord is a naturally resistant material that can last for many years. The seat is available as a spare part and can be replaced if needed.
1 self-storing extension leaf included.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Material
Extendable table- Top panel:
- Particleboard, Stain, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Tinted clear lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
- Cross rail:
- Particleboard, Plastic foil
Chair- Side frame/ Cross rail:
- Solid beech, Adhesive, Stain, Tinted clear lacquer
- Seat:
- Steel, Paper, Epoxy/polyester powder coating, Clear lacquer
- Backrest:
- Layer-glued wood veneer, Beech veneer, Stain, Tinted clear lacquer
Care
Extendable tableWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
ChairWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
If placed close to a radiator or other source of heat, the material can dry out and deteriorate.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
- The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.This seating furniture has been tested for public use and meets the requirements for safety, durability and stability set forth in the following standards: EN 16139-Level 1.
Assembly instructions
TONSTAD Extendable table806.007.29SKANSNÄS Chair505.632.43TONSTAD / SKANSNÄS Table and 2 chairs, brown stained oak veneer/brown beech, 80/120x70 cmAdvice and care instructions
TONSTAD Extendable table806.007.29
This product is made up of more than one component. You can find the details of these components below.
