STRANDTORP / BERGMUND Table and 8 chairs, white/Orrsta light grey,
How to get it
You can easily change the size of this 3-in-1 table to seat 4, 6 or 8 persons using the included self-storing leaves. If you add a seat to each short side you can even fit up to 10 persons.
Article number694.410.96Product details
You can easily change the size of this 3-in-1 table to seat 4, 6 or 8 persons using the included self-storing leaves. If you add a seat to each short side you can even fit up to 10 persons.
The 2 self-storing leaves are easy to insert to extend the table and just as easy to remove and tuck away under the table top when your guests have gone home.
The white table top has a top layer of foil for durability and a smooth, flawless look.
The table legs and underframe are made of sturdy, durable powder-coated steel.
Thanks to new research and a new technique, the upholstered chair gives you optimal seating comfort. Change the style anytime by replacing the chair cover with one in a different colour or model.
The upholstery of the chair consists of straight polyester fibres with small gaps between them – providing comfy elasticity and better ventilation so you enjoy a pleasant temperature when sitting.
The seat's bowl-shaped bottom is adapted for your sit bones and those of most of the world's population. And with an innovative technique, the seat's padding is shaped to maximise your comfort.
The backrest has a built-in lumbar support and the angle between the seat and the backrest is optimally adapted to make it comfortable for you to sit a little longer at the dining table.
ORRSTA cover is woven from cotton and polyester with a light structure that makes it soft and comfortable. The yarn-dyed fabric has a tone-on-tone effect and a clean and calm look.
The cover is easy to keep clean as it is removable and can be washed.
The chair legs are made of solid wood, which is a durable natural material.
Only recommended for indoor use.
Seats 4-10.
The tabletop comes with an anti-scratch protection film which is easy to remove after assembly.
Possible to separate for recycling or energy recovery if available in your community.
May be completed with FIXA stick-on floor protectors; protect the underlying surface against wear.
- Extendable tableTable top:
Particleboard, Plastic foil, Plastic edging
Side rail:Steel, Epoxy/polyester powder coating, Acrylic coating
End rail/ Leg/ Bracket:Steel, Epoxy/polyester powder coating
Chair frameLeg:Solid wood, Acrylic paint
Seat frame:Steel, Epoxy/polyester powder coating
Backrest frame:Steel
Support panel:Polyethylene plastic
Backrest cushion/ Seat cushion:100% polyester
Lining:Polyester wadding
Chair coverBack fabric/ Lining:100 % polyester (100% recycled)
Cover/ Fabric:35% cotton, 65% polyester (min. 90% recycled)
TableTable and 8 chairsWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Extendable table/chair frameFor maximum quality, re-tighten the screws when necessary.
Removable coverChair coverMachine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.
ChairTable and 8 chairsVacuum clean.
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Light stains can be removed with textile cleaner or a sponge damped in water or a mild soapy solution.
- This chair has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover's ability to resist abrasion has been tested to handle 20,000 cycles. A cover that withstands 15,000 cycles or more is suitable for furniture that should withstand everyday use in the home.
- Extendable table
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
By using sawmill leftovers and scrap wood in the particle board in this product, we make use of whole trees and not only the trunks. That way, we take better care of resources.
Chair frameWe want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
By using a renewable material like wood in this product, we avoid using fossil or finite materials.
Chair coverWe want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
The cotton in this product is grown with less water, less chemical fertilizers and less chemical pesticides, while increasing profit margins for the farmers. That way, we lower our environmental impact.
Measurements
Length: 205 cm
Table min. length: 150 cm
Table max. length: 260 cm
Width: 95 cm
Height: 75 cm
- This product comes as 19 packages.STRANDTORPExtendable tableArticle number204.872.79This product has multiple packages.
Width: 43 cm
Height: 12 cm
Length: 132 cm
Weight: 20.25 kg
Package(s): 1
Width: 78 cm
Height: 5 cm
Length: 99 cm
Weight: 26.00 kg
Package(s): 1
Width: 59 cm
Height: 4 cm
Length: 99 cm
Weight: 20.80 kg
Package(s): 1
BERGMUNDChair frameArticle number204.519.06Width: 51 cm
Height: 23 cm
Length: 62 cm
Weight: 8.32 kg
Package(s): 8
BERGMUNDChair coverArticle number504.862.02Width: 18 cm
Height: 4 cm
Length: 21 cm
Weight: 0.43 kg
Package(s): 8
Long dinners just got more comfortable
BERGMUND chair was created so that you can sit longer while enjoying nice dinners – without your legs starting to feel stiff or your back aching. To succeed, we dove into new research on the human body, which led to us developing a new technique to get a really comfortable seat.
Sitting may not seem like an active movement, but it actually involves everything from the body's bones and muscles to tendons, cartilage and joints. "So that you sit comfortably for longer, it’s important that the body enjoys the right support in the right place", explains material developer Anders Bergner.
Our key common trait – sit bones
With BERGMUND, Anders and the team studied new research to develop the shape of the seat and to find the optimal angle between the seat and the backrest. This resulted in several interesting insights about the human body – for example that the sit bones of all humans are actually very similar. "It’s true, regardless if someone is 1.85 metres tall or much shorter. So the bowl-shaped bottom of the seat was given a geometry that fits 99% of the world's population.”
Innovation paves a way for more comfort
The polyester in the seat’s padding and backrest comprises of small vertical fibres which provide better elasticity compared to fibres which are more entangled. Anders and his team then developed an innovative technique to further increase the seating comfort by shaping the seat’s padding. “It compares to making a waffle. The polyester fibres are fed into a special tool where the correct shape fixes in place.” After several years of development, Anders hopes that BERGMUND helps people both enjoy nice seating comfort and even better moments together. "When everyone around the table is sitting comfortably, they can relax and focus more on each other."