Why does my door/drawer front have no pre-drilled holes for handles or knobs?
Our doors and drawer fronts are delivered without pre-drilled holes, so you can freely choose and place the handles and knobs you want.
Almost all of our doors and drawer fronts lack pre-drilled holes. It is a conscious choice to give you maximum flexibility when choosing handles or knobs from our range. Since all kitchens are different, you can decide for yourself which fittings you want and exactly where on the door they should be placed.
To make installation easier, we offer FIXA drill template, which helps you position the hole correctly and get a neat and uniform result. All our handles and knobs are also supplied with the appropriate screws, so you have everything you need to get started right away.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
PAX doors with hinges are not pre-drilled, so you can choose which knobs and handles to use and where to place it on the door.
Read moreIf your drawer fronts overlap, it may be because the rails or fittings that attach the drawer front are not mounted correctly. Check that the rails are in the correct holes and that the screws for the bottom drawer front fittings are positioned as directed.
Read moreDepending on where the drawer is intended to be positioned within the cabinet (at the bottom, above the bottom drawer or as an internal drawer), the drawer and drawer front need to be assembled differently. If the drawer front appears misaligned or positioned incorrectly it is most likely because it has not been assembled according to the intended position within the cabinet.
Read moreIn a PAX corner solution, in cases where you can have a door, there should only be handles on one of the doors so that they can be opened freely. The second door opens using the grab strip that comes with the PAX add-on unit.
Read moreAlmost all of our knobs and handles are designed for doors with a thickness of 16–22 mm. You can read about which door thickness each knob or handle is suitable for on the respective product page.
Read moreOnly BESTÅ hinges are compatible with the BESTÅ system. These hinges are sold separately and do not come with the doors.
Read more