The water in my dishwasher does not get hot, what do I do?
If limescale builds up in the dishwasher, the heating element’s ability to heat the water may be reduced, which could be the reason you are experiencing that the water in your dishwasher is not getting hot. There are a couple of different solutions to the problem, read more below.
Solution 2: If the hardness level exceeds >5°, fill with a special salt known as "dishwasher salt". Run a wash cycle immediately after filling the dishwasher salt.
Solution 3: Descale the dishwasher by using dishwasher descaler, or completely ordinary citric acid. Pour the descaler or citric acid into the detergent dispenser (200 grams) and run a hot programme without dishes.
Solution 4: Run a hot program along with dishwasher cleaner.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
Dishwashers may contain a little water after testing in factories.
Read moreTo find out what the error code shown on the display of your dishwasher means, you can consult the product's user manual. When you get an error code, try the recommended solution and if this does not solve the problem, contact us at IKEA Customer service.
Read moreDescale the dishwasher using a descaling agent for dishwashers or ordinary citric acid. Pour the descaling agent or citric acid into the detergent compartment (200 grams) and run a hot program without load. How often you need to descale your dishwasher depends entirely on the hardness of the water and whether dishwasher salt is used.
Read moreWe recommend that the dishwasher is always stored at a guaranteed temperature of at least 10 degrees Celcius.
Read moreIf your faucet is hard to turn by the the neck, the dishwasher shut-off, or when setting the water flow, it may be because it takes a while for the synovial fluid to heat up and the natural synovial fluid has dried out.
Read moreDishwashers can emit a faint, harmless odor when they are new and hasn't been run as many times. If the smell coming from the machine is foul, such as sewer or mold, it often means that there is a blockage somewhere in the machine, in an external water trap or that dirty dishes with old food residues have been left inside the machine for a long time.
Read more