FIXA drill template have holes at different distances, to fit our knobs and handles drilling distance. The purpose of the drill template is to simplify assembly and ensure that the placement is the same on all fronts.
How to use the drill template:
1. Measure out the middle of the front with a pencil, measure on top of the drawer front
2. Place the jack in the middle of the drill template at the mark you made
3. Choose the height you want to put the handle/knob at
4. Measure out which holes will be used for the selected handle/knob
5. Mark with a pencil in the holes you want to use
6. Remove drill template and drill
How is the FIXA drill template used?
To achieve the dream kitchen, it is important even with the small details! The FIXA drill template helps you get both knobs and handles centered.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
Our doors and drawer fronts are delivered without pre-drilled holes, so you can freely choose and place the handles and knobs you want.
Read morePAX doors with hinges are not pre-drilled, so you can choose which knobs and handles to use and where to place it on the door.
Read moreFIXA worktop cover strip can be used if several pre-cut worktops are to be joined together, for example to form a long worktop or for a corner.
Read moreIf you have a row of base cabinets with an open end that ends with a dishwasher, you need to add a cover panel that goes from the floor up to the countertop. This is because the countertop should not rest directly on the dishwasher or on a refrigerator or freezer.
Read moreYes, sure, you can. Give your cabinet or wardrobe a complete look with VARIERA or KOMPLEMENT cover plugs.
Read moreWe recommend applying masking tape on both sides of the cut, as the tape reduces the risk of splintering. Use the finest-toothed saw possible.
Read more