Can I order new doors and drawer fronts for FAKTUM?
Yes, you can! At the moment, we have two different doors and drawer fronts that you can choose from to update your kitchen. You can either get help from our staff in one of our stores or customer service to place an order. Please note that FAKTUM products today have different names than when they were previously sold.
The new doors and drawer fronts come in three different variants, APLARED, ABBETORP and LILLBYN. All three can be ordered with the help of either staff at the stores or via customer service. If you order new doors or drawer fronts they come without a guarantee but come with a 3-year right to file a complaint.
Keep in mind that the doors may differ in colour from your older doors or drawer fronts to your new ones. White lacquered doors turn yellow over time, it is not a product defect. It is a natural aging.
You don't need to buy new hinges for your doors, the old ones work just fine to use!
Below you can see what our new FAKTUM products are called in today's range and what they corresponded to when we sold FAKTUM.
Below you can see what our new FAKTUM products are called in today's range and what they corresponded to when we sold FAKTUM.
- APLARED white, FAKTUM name was APPLÅD.
- ABBETORP white, FAKTUM name was ABSTRAKT
- LILLBYN off-white, FAKTUM name was LIDINGÖ.
- FAKTUM plinth high-gloss, off-white and white, FAKTUM name was PERFEKT.
- FAKTUM hinge 125°, FAKTUM name was INTEGRAL.
- FAKTUM hinge 153°, FAKTUM name was INTEGRAL.
- UTRUSTA hinge 95° fridge/freezer, FAKTUM name was INTEGRAL.
Cover panels are available for all doors and drawer fronts and are named the same as the door and drawer front.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
To remove the drawer front from a RATIONELL drawer purchased after February 2009, tilt up the plastic part located on the outside of the drawer and then pull it straight out from the drawer. Repeat this on both sides of the drawer to remove the drawer front.
Read moreMany of our appliances are compatible with the FAKTUM kitchen system, so you are welcome purchase new appliances from us. However, some models may require modifications or are not compatible. Below is a list of appliances that do not fit the FAKTUM system without adjustments.
Read moreThe VÅGLIG connecting rail is not compatible with FAKTUM.
Read moreOur doors and drawer fronts are delivered without pre-drilled holes, so you can freely choose and place the handles and knobs you want.
Read moreIf your doors or drawer fronts are not aligned with each other, you can adjust them by tightening the hinges for the doors or the drawer rails for the drawer fronts. The adjustment ensures that the doors and drawer fronts are at the correct height and position, which can be done both up, down, to the right, and to the left, depending on which part needs fine-tuning.
Read moreA cover panel is a decorative panel that is mounted on the side of a cabinet to give the kitchen a uniform and stylish look.
Read more