LÅNGUDDEN Inset sink, 2 bowls, stainless steel, 75x53 cm

Product details

• Good to know

  To be completed with LILLVIKEN water trap and strainer.

  May be completed with LILLVIKEN lid.

  Fits cabinet frames min. 80 cm wide.

  May be completed with sink accessories for effective use of space on the sink.

  Can be under-glued.

  When stainless steel is new, it is natural that the first scratches are visible. They become less visible over time as the material is used and gets a more matte tone.

  35 mm hole for kitchen mixer tap.

• Materials and care

  Material

  Body/ Body:

  Stainless steel

  Foam/ Foam:

  Polyurethane plastic

  Support panel/ Support panel:

  Polypropylene plastic

  Care

  Wipe dry with a clean cloth.

  Always wipe and rub the sink along the steel grain when cleaning.

  Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.

  Do not use scouring-powder, steel wool, hard or sharp tools which can scratch the stainless steel surface.

• Safety and compliance
  This product bears the CE mark.
• Assembly and documents

  Assembly instructions

  LÅNGUDDEN Inset sink, 2 bowls003.151.75LÅNGUDDEN Inset sink, 2 bowls003.151.75

  Advice and care instructions

  LÅNGUDDEN Inset sink, 2 bowls003.151.75LÅNGUDDEN Inset sink, 2 bowls003.151.75LÅNGUDDEN Inset sink, 2 bowls003.151.75