HORNVALLMO Block-out pleated blind, white/top-down bottom-up, 58.5x130 cm
How to get it
- Block out
- No drilling
This pleated blind can be mounted in any way to block out light from the moon, sun or street lamps. Pull from top to bottom or from bottom to top – or just cover a section in the middle of the window
Product details
Suitable for rooftop windows, tilt windows and turn windows.
The blind can be cut and re-cut to fit a smaller window. Ensure that you do not exceed maximum cut length.
Drill-free mounting using the 4 included brackets with adhesive tape. The adhesive has been tested and approved for smooth glass surfaces.
The blind is cordless for increased child safety.
The assembly instructions include a table with numbers corresponding to those on the fabric and rails to facilitate precise measuring and cutting.
The rails at the top and bottom allow you to mount the pleated blind precisely, covering any gap.
Easy to maneuver using either of the plastic handles at the top or bottom.
Depending on your needs, you can pull the blind from the top down or from the bottom up. You can also adjust the blind so it only covers a section in the middle.
The block-out fabric effectively blocks out light and completely darkens your room, helping to set the perfect ambience for a movie night or to secure a good night’s sleep.
Henrik Preutz
Good to know
Highly recommended to attach to surfaces made of glass.
For window frames or surfaces not recommended for the adhesive, mount the brackets with screws using a drill or screwdriver. The brackets are prepared with small holes for this purpose.
To reposition or reuse on another window, remove adhesive-mounted brackets with plastic hand scraper. Replace with new brackets available cost-free at IKEA stores or contact IKEA Customer Services for help.
For door windows or windows taller than 130 cm, mount 2 pleated blinds to cover the whole surface.
The top rail of the 58.5 cm wide blind can be cut max. 38.5 cm.
If you need to adapt the dimensions of the pleated blind to your window, cut the top/bottom rails and the rods with a metal saw. Cut the fabric with a safety knife.
The included tool makes it easier to get straight, accurate lines when adapting the size of your rail/rod/fabric. It also protects your fingers.
For a smooth, friction-free glide, apply a few drops of silicone spray lubricant to the lock mechanism in the brackets. Ensure the spray is suitable for plastic and metal.
Can also be used in bathrooms.
Materials and care
Material
- Fabric:
- 100 % polyester (100% recycled), 100 % Polyethylene plastic
- Top rail/ Bottom rail:
- Aluminium (min. 70% recycled), Powder coating
- Rod:
- Stainless steel, Powder coating
- Lock mechanism:
- Polyamide plastic, ABS plastic, Reinforced polyamide plastic
- Handle:
- ABS plastic
- Tool:
- Polypropylene plastic
Care
Do not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dryclean.
Wipe clean with a dry cloth.
Assembly and documents
Assembly instructions
Measurements
- Length: 130 cm
- Area: 0.76 m²
- Width: 58.5 cm
Packaging
HORNVALLMO
Article number105.566.59- Width: 9 cm
- Height: 3 cm
- Length: 132 cm
- Weight: 0.95 kg
- Package(s): 1
Customer reviews
Accessories for HORNVALLMO
Function solution
Block-out fabric
The block-out fabric effectively blocks out all light. Perfect for people who are sensitive to light during sleep, anytime of the day. It prevents glare on TV’s and digital screens. It offers complete privacy at all hours since people outside cannot see in, even when the room is lit.