Skip to main content

GENOMDRIVA Under cabinet extractor hood, stainless steel

Precio $ 2299
Prices include IVA.

How to get it

Product features
  • 5 year guarantee

A kitchen hood with LED lighting and all the basic functions you need. Coordinates with other stainless steel appliances and creates a uniform look in your kitchen since you mount it inside a wall cabinet.

Article number304.621.36

Product details

5 year guarantee. Read about the terms in the guarantee brochure.

The included LED bulb provides energy saving.

Control panel placed at front for easy access and use.

Designer

IKEA of Sweden

Article number304.621.36

Good to know

5 sones.

90 CFM.

Motor power: 49W.

Voltage: 120V.

Built-in extractor hood with 2 different speeds.

To be installed in a 30" wide wall cabinet.

You will find complete information about the installation and use of this product under the tab Assembly instructions & documents.

1 grease filter included.

Materials and care

Care

Clean surfaces with a soft cloth dampened with water and a mild washing-up detergent/soap or a cleaning detergent specifically designed for the appliance.

Never use corrosive or abrasive detergents, abrasive sponges, scourers or metallic scrapers.

Safety and compliance

This extractor hood is not recommended for use with 30" gas cooktops.

Assembly and documents

Measurements

  • Width: 76.2 cm
  • Depth: 47.3 cm
  • Height: 16.4 cm
  • Weight: 5.00 kg

Packaging

GENOMDRIVA

Article number304.621.36
  • Width: 54 cm
  • Height: 17 cm
  • Length: 80 cm
  • Weight: 5.70 kg
  • Package(s): 1

Quality

Sensitive to noise or have an open-plan home?

For extractor hoods, a noise level below 60 dB is considered low – roughly equivalent to a normal conversation between two people. We measure the noise level of our hoods at max speed, making it easier to compare different models. Note that sound levels decrease at lower speeds, and recirculating hoods are typically louder than those vented outdoors. Noise may also increase if the ducting is long or has several bends, as the air has to work harder to pass through the system.

Function solution

Sound levels

Sound levels for appliances are measured in decibels (dBs). Our extractor hoods have been tested in speed 3 to determine the dB level. The sound level of your extractor hood is affected by: • Type of installation. Exhaust-mode or recirculation-mode. • Length and diameter of the exhaust pipe between extractor and exhaust vent. The longer it is and the smaller the diameter, the louder it gets. • 90° bends. The more bends you have in the exhaust pipe, the greater the sound.

Get the look

Ideas based on your recently viewed products