Skip to main content
EN JPEnglish

My product didn't come with screws for attaching it to a wall.

For safety reasons, please attach your IKEA product to a wall if instructed to do so by the assembly instructions. Wall anchoring screws are not included with products because you need different wall anchoring screws depending on the material and structure of the surface your product will be attached to.*

The page below explains some simple ways to check the structure of your wall and what material it is made of. It also explains how to choose the right screws for your wall.

More on how to select and fix screws for attaching products to walls

*Excludes some products.

What particular parts of our articles do you find unsatisfactory or unhelpful?

The text is confusing to understand

The text is not relevant to my question

The text is relevant but not helpful

The text is too long or too short

Thank you for your feedback!

Was the article not helpful? Try one of the related articles below.

  • What is the approximate initial charge time for FIXA/Screwdriver/Drill 7.2V?

    Charging is completed in 3~8 hours. When charging, the red LED indicator will light up and turn off when charging is complete.

    Read more

  • The shelf support parts of the MICKE desk with storage are stiff. I can’t get them in.

    The shelf supports will be stiff when you fit them, so please use a hammer as necessary. If you have to remove them, try using pliers.

    Read more

  • How can I find details about an IKEA product?

    More detailed information about our products, such as dimensions, weight, package measurements and other useful information, can be found directly on the product page.

    Read more

  • The casters of the swivel chair do not work, is this defective?

    While sitting in the chair, try moving it forward, backward, left and right.

    Read more

  • What sort of screws should I use to anchor furniture to walls?

    IKEA recommends you to use wall fixing screws that are suitable for your walls. As wall materials vary, screws for wall fixation are not included.*

    Read more

  • I don't know how to adjust the torque of the FIXA screwdriver/drill.

    The torque can be set between 1 and 15, and the higher the number, the stronger the tightening force. In addition, since it has a stopper function, if the screw is jammed, it will spin idle and the screw head will not collapse.

    Read more