How do I choose the right wall-mounting screws and install a mirror?
Choose screws and fittings that are suitable for the wall material in your home. We also explain how to install a mirror that has three wall-mounting brackets on the back.
What type of screws should I use for wall mounting?
IKEA asks you to use wall-mounting screws that are suitable for your home. Different wall materials require different types of screws, so screws for mounting products to walls or ceilings are not included with the products.*
Walls and floors are made from many different materials. Choose fittings that are suitable for the wall or floor material in your home. Additional support may be needed inside the wall. Check the wall material carefully and always consult a qualified professional, such as a building contractor.
Choose suitable screws and fittings from the IKEA TRIXIG series or your local hardware store.
[See how to choose wall-mounting screws]
*Excludes some products.
There are only three wall-mounting brackets on the back of the mirror. What should I do?
A mirror with three brackets on the back can be mounted either vertically or horizontally. Hang the mirror from the two brackets at the top.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
For safety reasons, please attach your IKEA product to a wall if instructed to do so by the assembly instructions. Wall anchoring screws are not included with products because you need different wall anchoring screws depending on the material and structure of the surface your product will be attached to.*
Read moreYes. Large storage units like PAX wardrobes need to be attached to a wall to keep them from falling over.
Read moreThere are two types of screws of similar shape, large and small. Please check again.
Read moreCheck the direction of the legs and the position of the screw holes. Use a correctly sized Pozidriv screwdriver to tighten the screws. The translucent cap-shaped pieces are protective packaging materials that prevent the tubes from being damaged during transport.
Read moreLoosely insert the screws while assembling the product to make it easier to align the screw holes. If the sides of the shelves are flared outwards, you can bend them inwards.
Read more