I’m having trouble adding and removing my TRÅDFRI Light Sources.
A simple guide to add or remove your TRÅDFRI Light Sources.
Add bulbs, doors and panels
It’s easy to add light sources such as bulbs, doors and panels to your remote control.
- Install the light source and turn on the main power switch.
- Keep the remote within 5cm of the light source and press the pairing button for 10 seconds (located under the remote control lid).
- A red light will shine on the remote control and, when it’s successfully paired, the light source will dim and flash once.
Watch this video to see how it's done!
Remove bulbs, doors or panels
To remove a smart light source, perform a factory reset of it by toggling the main switch 6 times.
Watch this video to see how it's done!
Add several bulbs in one light fixture
If you have a light source with multiple bulbs which sit close together, you’ll need to pair them one by one. Install your first light bulb, pair it and then remove it. Then install the second light bulb, pair it and remove it, etc. Do this with all the light bulbs.
Watch this video to see how it's done!
Add a light bulb to the TRÅDFRI dimming kit
To extend your TRÅDFRI dimming kit with another bulb, install the bulb and turn on the main power switch. Keep the wireless dimmer within 5cm of the bulb. Press the pairing button for 10 seconds (located under the top cover). When it’s successfully paired, the light source will dim and flash once.
Watch this video to see how it's done!
Add a light bulb to the TRÅDFRI motion sensor
To extend your TRÅDFRI motion sensor kit with another bulb, install the bulb and turn on the main power switch. Keep the motion sensor within 2cm of the bulb and press the pairing button for 10 seconds (located on the back). When it’s successfully paired, the light source will dim and flash once and a red light will shine on the front of the motion sensor.
Watch this video to see how it's done!
Add FLOALT lighting panels
Learn how to expand your IKEA smart lighting system with FLOALT lighting panels.
Watch this video to see how it's done!
Did you find this useful?
Thank you for your feedback!
What particular parts of our answer do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
-
I’m having trouble installing my Smart lighting kit.
A simple guide to installing your TRÅDFRI Smart Kits.
Read more
-
I cannot add the light source into the TRÅDFRI gateway.
Read more
-
How do I get the TRÅDFRI bulbs back in sync if they have lost connection?
Light sources can become out of sync when you interact with the main power switches (wall or lamp switches) with part of your connected light bulbs.
Read more
-
I bought a gateway and a light bulb, I cannot seem to find the light bulb with the TRÅDFRI gateway?
You will need a steering device in order to add a light source to the TRÅDFRI gateway.
Read more
-
I added a white spectrum or colour spectrum light bulb but I don’t understand how to change the colour using the wireless dimmer.
Read more
-
Can I use other light bulbs in an IKEA lamp?
You can use any light bulb in your IKEA lamp, so long as the wattage value on your light bulb does not exceed the maximum watt value of the IKEA lamp.
Read more