A large part of the rail is made of steel, but it's the small details that make the difference to match your drawer.
The white one has the article number: 602.635.88
The black-grey has the article number: 106.041.13
Why are there two different UTRUSTA connecting rail for fronts?
We sell two UTRUSTA connecting rail for fronts in two different variants, one white and one black-grey. This is to match the look of the rest of the kitchen. The white one is used for MAXIMERA drawers while the black-grey one is used for KNIVSHULT.
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
With our METOD cabinets, you have the flexibility to choose from various UTRUSTA hinges, tailored to whether you prefer drawers or doors for your cabinet.
Read moreHow you attach a drawer front onto your dishwasher depends on the type of dishwasher and the front you have chosen. In the assembly instructions for the VÅGLIG connecting rail, which you need to mount the front onto the dishwasher, you'll find the specific details for your specific dishwasher model.
Read moreIf the drawer hits the water trap or adjacent fronts, it’s usually due to incorrect installation. Please check that the drawer runner is positioned correctly and that the bracket between the drawer and the front is mounted according to the instructions - this depends on the drawer’s placement in the cabinet.
Read moreA cover panel is a decorative panel that is mounted on the side of a cabinet to give the kitchen a uniform and stylish look.
Read moreIf your doors or drawer fronts are not aligned with each other, you can adjust them by tightening the hinges for the doors or the drawer rails for the drawer fronts. The adjustment ensures that the doors and drawer fronts are at the correct height and position, which can be done both up, down, to the right, and to the left, depending on which part needs fine-tuning.
Read moreThe hinges for METOD are designed so that you don’t need any loose screws. The part that attaches to the cabinet frame comes pre-installed with screws from the factory.
Read more