How do I rewire the KNYCKLAN dishwasher shut-off with the remote control?
You must first perform a reset of both the drive under the sink (water shut-off) and the remote control before you can pair them again.
- Start by resetting the water shut-off. Press the on and off buttons on the water shut-off at the same time for five seconds.
- The next step is to reset the remote. Press the reset button four times within five seconds. A red light will flash on the remote and then switch to a pulsing light. When it pulses or is off on the remote control, you can pair it to the water shut-off. Click here to see how to find the reset button on your remote.
- Now quickly press both buttons 2-3 times at the same time on the water shut-off. The buttons will now flash red and green – indicating that it is ready to pair.
- Hold the remote control about 1–2 cm from the water shut-off. Press and hold the pairing button on the back of the remote for 10-15 seconds. When the lights stop flashing, the pairing is complete.
- The pairing should now be done!
Still need help? Don't hesitate to contact our customer support!
Did you find this useful?
Thank you for your feedback!
What particular parts of our articles do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
KNYCKLAN with the dishwasher shut-off function is designed for one dishwasher.
Read moreYou need to be able to turn off the water supply to the dishwasher when it’s not in use. This is to prevent leaks and water damage in your kitchen. Without a dishwasher shut-off valve, insurance companies may deny compensation in the event of water damage.
Read moreThe fittings for assembling your IKEA dishwasher are packaged together with the manual and are stored in the upper dishwasher basket when you receive the product.
Read moreYes, it works perfectly fine to synchronize your KNYCKLAN remote control to multiple devices.
Read moreHow you attach a drawer front onto your dishwasher depends on the type of dishwasher and the front you have chosen. In the assembly instructions for the VÅGLIG connecting rail, which you need to mount the front onto the dishwasher, you'll find the specific details for your specific dishwasher model.
Read moreTo find out what the error code shown on the display of your dishwasher means, you can consult the product's user manual. When you get an error code, try the recommended solution and if this does not solve the problem, contact us at IKEA Customer service.
Read more